Important Change: Previously, the ndbinfo information database included lookup tables that used the MyISAM storage engine. This dependency on MyISAM has now been removed. (Bug #20075747, WL #7575)

Important Change: Previously, the NDB scheduler always optimized for speed against throughput in a predetermined manner (this was hard coded); this balance can now be set using the SchedulerResponsiveness data node configuration parameter. This parameter accepts an integer in the range of 0-10 inclusive, with 5 as the default. Higher values provide better response times relative to throughput. Lower values provide increased throughput, but impose longer response times. (Bug #78531, Bug #21889312)

Important Change: A number of MySQL NDB Cluster data node configuration parameters were deprecated in earlier versions of MySQL NDB Cluster, and have been removed with this release. These parameters include Id, NoOfDiskPagesToDiskDuringRestartTUP, NoOfDiskPagesToDiskDuringRestartACC, NoOfDiskPagesToDiskAfterRestartACC, NoOfDiskPagesToDiskAfterRestartTUP, ReservedSendBufferMemory, MaxNoOfIndexes, and Discless (use Diskless instead), as well as DiskCheckpointSpeed and DiskCheckpointSpeedInRestart. The archaic and unused ByteOrder computer configuration parameter has also been removed, as well as the unused MaxNoOfSavedEvents management node confugration parameter. These parameters are no longer supported; most of them already did not have (or no longer had) any effect. Trying to use any of these parameters in a MySQL NDB Cluster configuration file now results in an error.

For more information, see What is New in NDB Cluster 7.5. (Bug #77404, Bug #21280428)

Important Change: The ndbinfo database can now provide default and current information about MySQL NDB Cluster node configuration parameters as a result of the following changes:

You can obtain values of MySQL NDB Cluster configuration parameters by name using a join on these two tables such as the one shown here:

SELECT  p.param_name AS Name,
        v.node_id AS Node,
        p.param_type AS Type,
        p.param_default AS 'Default',
        v.config_value AS Current
FROM    config_params p
JOIN    config_values v
ON      p.param_number = v.config_param
WHERE   p. param_name IN ('NodeId', 'HostName','DataMemory', 'IndexMemory');

(Bug #71587, Bug #18183958, WL #8703)

Important Change: The ExecuteOnComputer configuration parameter for management, data, and API nodes is now deprecated, and is subject to removal in a future MySQL NDB Cluster version. For all types of MySQL NDB Cluster nodes, you should now use the HostName parameter exclusively for identifying hosts in the cluster configuration file.

This information is also now displayed in the output of ndb_config --configinfo --xml. (Bug #53052, Bug #11760628)

Deprecated MySQL NDB Cluster node configuration parameters are now indicated as such by ndb_config --configinfo --xml. For each parameter currently deprecated, the corresponding <param/> tag in the XML output now includes the attribute deprecated="true". (Bug #21127135)

Added the --ndb-cluster-connection-pool-nodeids option for mysqld, which can be used to specify a list of nodes by node ID for connection pooling. The number of node IDs in the list must equal the value set for --ndb-cluster-connection-pool. (Bug #19521789)

Added the PROMPT command in the ndb_mgm client. This command has the syntax PROMPT string, which sets the client's prompt to string. Issuing the command without an argument causes the prompt to be reset to the default (ndb_mgm>). See Commands in the NDB Cluster Management Client, for more information. (Bug #18421338)

When the --database option has not been specified for ndb_show_tables, and no tables are found in the TEST_DB database, an appropriate warning message is now issued. (Bug #50633, Bug #11758430)

The NDB storage engine now uses the improved records-per-key interface for index statistics introduced for the optimizer in MySQL 5.7. Some improvements due to this change are listed here:

(WL #8165)

Incompatible Change; NDB Cluster APIs: The pollEvents2() method now returns -1, indicating an error, whenever a negative value is used for the time argument. (Bug #20762291)

Important Change; NDB Cluster APIs: Ndb::pollEvents() is now compatible with the TE_EMPTY, TE_INCONSISTENT, and TE_OUT_OF_MEMORY event types introduced in MySQL NDB Cluster 7.4.3. For detailed information about this change, see the description of this method in the MySQL NDB Cluster API Developer Guide. (Bug #20646496)

Important Change; NDB Cluster APIs: Added the method Ndb::isExpectingHigherQueuedEpochs() to the NDB API to detect when additional, newer event epochs were detected by pollEvents2().

The behavior of Ndb::pollEvents() has also been modified such that it now returns NDB_FAILURE_GCI (equal to ~(Uint64) 0) when a cluster failure has been detected. (Bug #18753887)

Important Change; NDB Cluster APIs: To release the memory used for dropped event operations, the event API formerly depended on pollEvents() and nextEvent() to consume all events possibly referring to the dropped events. This dependency between dropEventOperation() and the first two methods required the entire event buffer to be read before attempting to release event operation memory (that is, until successive calls to pollEvents() and nextEvent() returned no more events).

A related cleanup issue arose following the reset of the event buffer (when all event operations had previously been dropped), and the event buffer was truncated by the first createEventOperation() call subsequent to the reset.

To fix these problems, the event buffer is now cleared when the last event operation is dropped, rather than waiting for a subsequent create operation which might or might not occur. Memory taken up by dropped event operations is also now released when the event queue has been cleared, which removes the hidden requirement for consuming all events to free up memory. In addition, event operation memory is now released as soon as all events referring to the operation have been consumed, rather than waiting for the entire event buffer to be consumed. (Bug #78145, Bug #21661297)

Important Change; NDB Cluster APIs: The MGM API error-handling functions ndb_mgm_get_latest_error(), ndb_mgm_get_latest_error_msg(), and ndb_mgm_get_latest_error_desc() each failed when used with a NULL handle. You should note that, although these functions are now null-safe, values returned in this case are arbitrary and not meaningful. (Bug #78130, Bug #21651706)

Important Change; NDB Cluster APIs: The following NDB API methods were not actually implemented and have been removed from the sources:

Important Change: The options controlling behavior of NDB programs with regard to the number and timing of successive attempts to connect to a management server have changed as listed here:

(Bug #22116937)

Important Change: In previous versions of MySQL NDB Cluster, other DDL operations could not be part of ALTER ONLINE TABLE ... RENAME .... (This was disallowed by the fix for BUG#16021021.) MySQL NDB Cluster 7.5 makes the following changes:

(Bug #20804269, Bug #76543, Bug #20479917, Bug #75797)

References: See also: Bug #16021021.

NDB Disk Data: A unique index on a column of an NDB table is implemented with an associated internal ordered index, used for scanning. While dropping an index, this ordered index was dropped first, followed by the drop of the unique index itself. This meant that, when the drop was rejected due to (for example) a constraint violation, the statement was rejected but the associated ordered index remained deleted, so that any subsequent operation using a scan on this table failed. We fix this problem by causing the unique index to be removed first, before removing the ordered index; removal of the related ordered index is no longer performed when removal of a unique index fails. (Bug #78306, Bug #21777589)

NDB Cluster APIs: The binary log injector did not work correctly with TE_INCONSISTENT event type handling by Ndb::nextEvent(). (Bug #22135541)

References: See also: Bug #20646496.

NDB Cluster APIs: While executing dropEvent(), if the coordinator DBDICT failed after the subscription manager (SUMA block) had removed all subscriptions but before the coordinator had deleted the event from the system table, the dropped event remained in the table, causing any subsequent drop or create event with the same name to fail with NDB error 1419 Subscription already dropped or error 746 Event name already exists. This occurred even when calling dropEvent() with a nonzero force argument.

Now in such cases, error 1419 is ignored, and DBDICT deletes the event from the table. (Bug #21554676)

NDB Cluster APIs: Creation and destruction of Ndb_cluster_connection objects by multiple threads could make use of the same application lock, which in some cases led to failures in the global dictionary cache. To alleviate this problem, the creation and destruction of several internal NDB API objects have been serialized. (Bug #20636124)

NDB Cluster APIs: When an Ndb object created prior to a failure of the cluster was reused, the event queue of this object could still contain data node events originating from before the failure. These events could reference “old” epochs (from before the failure occurred), which in turn could violate the assumption made by the nextEvent() method that epoch numbers always increase. This issue is addressed by explicitly clearing the event queue in such cases. (Bug #18411034)

References: See also: Bug #20888668.

NDB Cluster APIs: Ndb::pollEvents() and pollEvents2() were slow to receive events, being dependent on other client threads or blocks to perform polling of transporters on their behalf. This fix allows a client thread to perform its own transporter polling when it has to wait in either of these methods.

Introduction of transporter polling also revealed a problem with missing mutex protection in the ndbcluster_binlog handler, which has been added as part of this fix. (Bug #79311, Bug #20957068, Bug #22224571, WL #8627)

NDB Cluster APIs: After the initial restart of a node following a cluster failure, the cluster failure event added as part of the restart process was deleted when an event that existed prior to the restart was later deleted. This meant that, in such cases, an Event API client had no way of knowing that failure handling was needed. In addition, the GCI used for the final cleanup of deleted event operations, performed by pollEvents() and nextEvent() when these methods have consumed all available events, was lost. (Bug #78143, Bug #21660947)

A serious regression was inadvertently introduced in MySQL NDB Cluster 7.4.8 whereby local checkpoints and thus restarts often took much longer than expected. This occurred due to the fact that the setting for MaxDiskWriteSpeedOwnRestart was ignored during restarts and the value of MaxDiskWriteSpeedOtherNodeRestart, which is much lower by default than the default for MaxDiskWriteSpeedOwnRestart, was used instead. This issue affected restart times and performance only and did not have any impact on normal operations. (Bug #22582233)

The epoch for the latest restorable checkpoint provided in the cluster log as part of its reporting for EventBufferStatus events (see NDB Cluster: Messages in the Cluster Log) was not well defined and thus unreliable; depending on various factors, the reported epoch could be the one currently being consumed, the one most recently consumed, or the next one queued for consumption.

This fix ensures that the latest restorable global checkpoint is always regarded as the one that was most recently completely consumed by the user, and thus that it was the latest restorable global checkpoint that existed at the time the report was generated. (Bug #22378288)

Added the --ndb-allow-copying-alter-table option for mysqld. Setting this option (or the equivalent system variable ndb_allow_copying_alter_table) to OFF keeps ALTER TABLE statements from performing copying operations. The default value is ON. (Bug #22187649)

References: See also: Bug #17400320.

Attempting to create an NDB table having greater than the maximum supported combined width for all BIT columns (4096) caused data node failure when these columns were defined with COLUMN_FORMAT DYNAMIC. (Bug #21889267)

Creating a table with the maxmimum supported number of columns (512) all using COLUMN_FORMAT DYNAMIC led to data node failures. (Bug #21863798)

In a MySQL NDB Cluster with multiple LDM instances, all instances wrote to the node log, even inactive instances on other nodes. During restarts, this caused the log to be filled with messages from other nodes, such as the messages shown here:

2015-06-24 00:20:16 [ndbd] INFO     -- We are adjusting Max Disk Write Speed,
a restart is ongoing now
...
2015-06-24 01:08:02 [ndbd] INFO     -- We are adjusting Max Disk Write Speed,
no restarts ongoing anymore

Now this logging is performed only by the active LDM instance. (Bug #21362380)

Backup block states were reported incorrectly during backups. (Bug #21360188)

References: See also: Bug #20204854, Bug #21372136.

For a timeout in GET_TABINFOREQ while executing a CREATE INDEX statement, mysqld returned Error 4243 (Index not found) instead of the expected Error 4008 (Receive from NDB failed).

The fix for this bug also fixes similar timeout issues for a number of other signals that are sent the DBDICT kernel block as part of DDL operations, including ALTER_TAB_REQ, CREATE_INDX_REQ, DROP_FK_REQ, DROP_INDX_REQ, INDEX_STAT_REQ, DROP_FILE_REQ, CREATE_FILEGROUP_REQ, DROP_FILEGROUP_REQ, CREATE_EVENT, WAIT_GCP_REQ, DROP_TAB_REQ, and LIST_TABLES_REQ, as well as several internal functions used in handling NDB schema operations. (Bug #21277472)

References: See also: Bug #20617891, Bug #20368354, Bug #19821115.

Previously, multiple send threads could be invoked for handling sends to the same node; these threads then competed for the same send lock. While the send lock blocked the additional send threads, work threads could be passed to other nodes.

This issue is fixed by ensuring that new send threads are not activated while there is already an active send thread assigned to the same node. In addition, a node already having an active send thread assigned to it is no longer visible to other, already active, send threads; that is, such a node is longer added to the node list when a send thread is currently assigned to it. (Bug #20954804, Bug #76821)

Queueing of pending operations when the redo log was overloaded (DefaultOperationRedoProblemAction API node configuration parameter) could lead to timeouts when data nodes ran out of redo log space (P_TAIL_PROBLEM errors). Now when the redo log is full, the node aborts requests instead of queuing them. (Bug #20782580)

References: See also: Bug #20481140.

An NDB event buffer can be used with an Ndb object to subscribe to table-level row change event streams. Users subscribe to an existing event; this causes the data nodes to start sending event data signals (SUB_TABLE_DATA) and epoch completion signals (SUB_GCP_COMPLETE) to the Ndb object. SUB_GCP_COMPLETE_REP signals can arrive for execution in concurrent receiver thread before completion of the internal method call used to start a subscription.

Execution of SUB_GCP_COMPLETE_REP signals depends on the total number of SUMA buckets (sub data streams), but this may not yet have been set, leading to the present issue, when the counter used for tracking the SUB_GCP_COMPLETE_REP signals (TOTAL_BUCKETS_INIT) was found to be set to erroneous values. Now TOTAL_BUCKETS_INIT is tested to be sure it has been set correctly before it is used. (Bug #20575424, Bug #76255)

References: See also: Bug #20561446, Bug #21616263.

NDB statistics queries could be delayed by the error delay set for ndb_index_stat_option (default 60 seconds) when the index that was queried had been marked with internal error. The same underlying issue could also cause ANALYZE TABLE to hang when executed against an NDB table having multiple indexes where an internal error occurred on one or more but not all indexes.

Now in such cases, any existing statistics are returned immediately, without waiting for any additonal statistics to be discovered. (Bug #20553313, Bug #20707694, Bug #76325)

Memory allocated when obtaining a list of tables or databases was not freed afterward. (Bug #20234681, Bug #74510)

References: See also: Bug #18592390, Bug #72322.

Added the BackupDiskWriteSpeedPct data node parameter. Setting this parameter causes the data node to reserve a percentage of its maximum write speed (as determined by the value of MaxDiskWriteSpeed) for use in local checkpoints while performing a backup. BackupDiskWriteSpeedPct is interpreted as a percentage which can be set between 0 and 90 inclusive, with a default value of 50. (Bug #20204854)

References: See also: Bug #21372136.

After restoring the database schema from backup using ndb_restore, auto-discovery of restored tables in transactions having multiple statements did not work correctly, resulting in Deadlock found when trying to get lock; try restarting transaction errors.

This issue was encountered both in the mysql client, as well as when such transactions were executed by application programs using Connector/J and possibly other MySQL APIs.

Prior to upgrading, this issue can be worked around by executing SELECT TABLE_NAME, TABLE_SCHEMA FROM INFORMATION_SCHEMA.TABLES WHERE ENGINE = 'NDBCLUSTER' on all SQL nodes following the restore operation, before executing any other statements. (Bug #18075170)

Using ndb_mgm STOP -f to force a node shutdown even when it triggered a complete shutdown of the cluster, it was possible to lose data when a sufficient number of nodes were shut down, triggering a cluster shutodwn, and the timing was such that SUMA handovers had been made to nodes already in the process of shutting down. (Bug #17772138)

When using a sufficiently large value for TransactionDeadlockDetectionTimeout and the default value for sort_buffer_size, executing SELECT * FROM ndbinfo.cluster_operations ORDER BY transid with multiple concurrent conflicting or deadlocked transactions, each transaction having several pending operations, caused the SQL node where the query was run to fail. (Bug #16731538, Bug #67596)

The ndbinfo.config_params table is now read-only. (Bug #11762750, Bug #55383)

NDB failed during a node restart due to the status of the current local checkpoint being set but not as active, even though it could have other states under such conditions. (Bug #78780, Bug #21973758)

ndbmtd checked for signals being sent only after a full cycle in run_job_buffers, which is performed for all job buffer inputs. Now this is done as part of run_job_buffers itself, which avoids executing for extended periods of time without sending to other nodes or flushing signals to other threads. (Bug #78530, Bug #21889088)

When attempting to enable index statistics, creation of the required system tables, events and event subscriptions often fails when multiple mysqld processes using index statistics are started concurrently in conjunction with starting, restarting, or stopping the cluster, or with node failure handling. This is normally recoverable, since the affected mysqld process or processes can (and do) retry these operations shortly thereafter. For this reason, such failures are no longer logged as warnings, but merely as informational events. (Bug #77760, Bug #21462846)

It was possible to end up with a lock on the send buffer mutex when send buffers became a limiting resource, due either to insufficient send buffer resource configuration, problems with slow or failing communications such that all send buffers became exhausted, or slow receivers failing to consume what was sent. In this situation worker threads failed to allocate send buffer memory for signals, and attempted to force a send in order to free up space, while at the same time the send thread was busy trying to send to the same node or nodes. All of these threads competed for taking the send buffer mutex, which resulted in the lock already described, reported by the watchdog as Stuck in Send. This fix is made in two parts, listed here:

(Bug #77081, Bug #21109605)