C H A P T E R 13 |
Replacing DIMMs |
This chapter provides procedures for installing DIMMs in the Sun Fire B100x and B200x blades. It contains the following sections:
This document provides the procedures for installing DIMMs in the Sun Fire B100x blade, and contains the following sections:
Check that the blue `Ready to Remove` LED is lit on the blade you want to remove from the system chassis.
Note - Do not remove the blade until this LED state is displayed. |
See the Sun Fire B1600 Blade System Chassis Administration Guide for details of how to shut down the blade safely.
Caution - Operating the system chassis with empty blade slots might disrupt airflow through the system chassis and will compromise EMC compliance. |
Caution - Do not touch, or apply pressure to, any part of the blade server's main printed circuit board assembly. |
This section provides the following procedures:
1. Remove the blade cover screws (FIGURE 1).