Sun Blade 6000 Multi-Fabric Network Express Module User’s Guide
User’s Guide
820-1705-14
Contents |
1. Features of the Sun Blade 6000 Multi-Fabric Network Express Module
Overview of the Sun Blade 6000 Multi-Fabric Network Express Module
Physical Appearance of the Multi-Fabric NEM
Multi-Fabric NEM Front-Panel LEDs
2. Installing, Removing, or Replacing the Sun Blade 6000 Multi-Fabric Network Express Module
Verifying Installation of the NEM
To Verify Installation With the ILOM CLI
To Verify Installation With the CMM ILOM Web Interface
3. ILOM For the Multi-Fabric NEM
ILOM 2.0 Proxy CLI Program For SAS-NEMs and Disk Modules
To Start the ILOM 2.0 Proxy CLI Program
Navigation Using the CMM ILOM CLI
CMM ILOM Management and Monitoring for SAS-NEMs and Disk Modules
What You Can Set or Change in the Proxy Program
To Upgrade ILOM Firmware Using the CLI
To Upgrade ILOM Firmware Using the ILOM Web Interface
4. Using the Common Array Manager
Using CAM With Disk Blades and Multi-Fabric NEMs
A. Using the lsiutil Application
Where to Obtain the lsiutil Software
Using the Interactive lsiutil Menus to Clear Your LSI Host Bus Adapter’s Non-Present Persistence Mappings
To Clear Your Non-Present Persistence Mappings
Saving a Snapshot of Your Host Bus Adapter Configuration
B. Upgrading the NEM to Allow a SAS-2 Compatible Server Blade in the Chassis
Server with a SAS-2 REM Might Hang When Inserted into a Chassis with SAS-1 Devices
Copyright © 2010, Oracle and/or its affiliates. All rights reserved.