How to Remove a StorEdge D1000 Disk Array

Use this procedure to remove a StorEdge D1000 disk array from a cluster. This procedure assumes that you want to remove the references to the disk drives in the enclosure.

1. Perform volume management administration to remove the disk array from the configuration.

   For more information, see your Solstice DiskSuite or VERITAS Volume Manager documentation.

2. Disconnect the SCSI cables from the disk array, removing them in the order shown in Figure 5-5.

   Figure 5-5 Disconnecting the SCSI cables

   
   

3. Power off, and disconnect the disk array from the AC power source.

   For more information, see the documentation shipped with your disk array.

4. Remove the disk array.

5. Identify the disk drives you need to remove.

   # cfgadm -al

6. On all nodes, remove references to the disk drives in the disk array you removed in Step 4.

   # cfgadm -c unconfigure cN::dsk/cNtXdY # devfsadm -C # scdidadm -C

7. If needed, remove any host adapters from the nodes.

   For the procedure on removing host adapters, see the documentation that shipped with your nodes.