System Management Services (SMS) 1.6 Installation Guide
819-4659-10
Contents |
1. Overview of SMS 1.6 Installation or Upgrade
Installing SMS 1.6 for Solaris 10 OS on SC With Solaris 9 OS
Installing SMS 1.6 for Solaris 9 OS on SC With Solaris 10 OS
Valid Paths for Version Switching
Solaris 9 OS Requirements for SCs
Solaris 10 OS Requirements for SCs
Solaris 8 OS Requirements for Domains
Solaris 9 OS Requirements for Domains
Solaris 10 OS Requirements for Domains
Conventions Used in Installation Examples
Solaris Security Toolkit Software Requirements
3. Installing or Upgrading SMS 1.6 Software
Freshly Installing SMS 1.6 Software on the SCs
To Install the Solaris OS on the SC
To Download SMS 1.6 Software From the Web
To Configure the Management Network
To Record the Chassis Serial Number on the Main SC
To Enable the Alternate Break Sequence
To Reboot the System Controller
To Upgrade the System Board Flash PROMs
Restoring Previously Installed Versions of the Solaris OS and SMS Software
To Install the Previously Installed Solaris OS on the Spare SC
To Install the Previously Installed Version of SMS on the Spare SC
To Restore the SMS Configuration on the Spare SC
To Install Any SMS Patches on the Spare SC
To Configure the Management Network
To Enable the Alternate Break Sequence
Upgrading SMS Software to Version 1.6
To Do Before Starting the Upgrade
To Disable Failover on the Main SC
To Back Up the SMS Environment on the Main SC
To Back Up the SMS Environment on the Spare SC
To Upgrade the Solaris OS on the Spare SC (Optional)
To Download SMS 1.6 Software From the Web for the Spare SC
To Remove the Solaris Security Toolkit from the Spare SC If You Have a Previous Package
To Upgrade SMS Software on the Spare SC
To Install Any SMS Patches on the Spare SC
To Manually Harden the Spare SC
To Switch Control to the Spare SC
To Upgrade the Spare SC Flash PROMs
To Reboot the Spare System Controller
To Upgrade the Solaris OS on the Main SC (Optional)
To Download SMS 1.6 Software From the Web for the Main SC
To Remove the Solaris Security Toolkit from the Main SC If You Have a Previous Package
To Upgrade SMS Software on the Main SC
To Install Any SMS Patches on the Main SC
To Manually Harden the Main SC
To Reboot the Main System Controller
To Upgrade the Main SC Flash PROMs
To Switch Control Back to the Main SC
To Upgrade the System Board Flash PROMs
4. Additional SMS 1.6 Software Procedures
To Add Users to SMS Groups and Configure Directory Access
Configuring an SC as an NTP Client
To Configure an SC as an NTP Client
To Manually Stop and Restart SMS
Changing the ssh Escape Character
To Permanently Change the ssh Escape Character
To Change the Escape Character for a Single ssh Session
Using the Alternate Break Sequence
To Enable the Alternate Break Sequence
To Switch to a Different Version of SMS
To Reharden After the Version Switch
Checking the Solaris Security Toolkit Version
To Determine Which Version of Solaris Security Toolkit Is Installed
To Remove an Incompatible Version of the Solaris Security Toolkit
Manually Backing Up and Restoring the SMS 1.6 Environment
To Back Up the SMS Environment
Changing IP Address or Host Name of SC or Domain
To Change the IP Address of an SC or Domain
To Change the Host Name of a Domain or SC
5. Setting Up and Installing Software on Domains
To Build a New Domain on the System Controller
To Open a Console for the Domain
Setting Up and Installing the Solaris Operating System on the Domain
To Set Up the Domain as an Install Client
To Install the Solaris Operating System on the Domain
To Set OpenBoot PROM Environment Variables for the Domain
Installing Additional Software Packages on Domains
To Install Additional Software Packages
Copyright © 2006, Sun Microsystems, Inc. All Rights Reserved.