C H A P T E R  1

System Management Services (SMS) 1.6 Release Notes

This chapter contains the release notes for System Management Services (SMS) 1.6 on Sun Firetrademark high-end systems and covers the following topics:


What's New in SMS 1.6

SMS 1.6 includes the following new features:.

AVL 2.0 FS-2 Features and Requirements

The AVL 2.0 FS-2 functionality in the SMS software encompasses the features described in the following Requests for Enhancement (RFEs):

 

AVL 2.0 FS-2 provides the following enhancements to the SMS software:



Note - The AVL 2.0 FS-2 functionality is not supported in the Solaris 10 1/06 OS release. You need to download and install a subsequent release of the Solaris 10 OS in order to make use of AVL 2.0 FS-2 features.




SMS 1.6 Software Patches

The following patches are available for SMS 1.6:

These patches are available at http://sunsolve.sun.com.


Software Requirements

This section contains the following topics:

For more information about the correct package to use for your version of the Solaris OS, refer to the System Management Services (SMS) 1.6 Installation Guide.

Requirements for the Domains

The software requirements shown in this section are the minimum software requirements for SMS 1.6. They vary by operating system.



Note - All software versions and patch levels shown in this section reflect the first versions that SMS 1.6 supports.



Solaris 8 OS Requirements



Note - SMS 1.6 does not support the Solaris 8 OS on the SCs. The Solaris 8 OS is supported on the domains only.



As a minimum, the Solaris 8 OS on the domains requires the Solaris 8 2/02 OS release.



Note - The Solaris 8 OS is not supported on domains running on UltraSPARC IV+ processors.



Solaris 9 OS Requirements

As a minimum, the Solaris 9 OS version on the domains requires:



Note - On systems with UltraSPARC IV+ 1.8 GHz processors, the first supported version of the Solaris 9 OS is Solaris 9 9/05.



Solaris 10 OS Requirements

As a minimum, the Solaris 10 OS version on the domains requires:

Requirements for the SCs

SMS 1.6 has different binary packages for the Solaris 9 OS and the Solaris 10 OS on the SCs. You must install the correct SMS package for your OS version. For more information about the correct package to use for your version of the Solaris OS, refer to the System Management Services (SMS) 1.6 Installation Guide.

The software requirements shown in this section are the minimum software requirements for SMS 1.6. They vary by operating system.



Note - All software versions and patch levels shown in this section reflect the first versions that SMS 1.6 supports.



Solaris 9 OS Requirements

As a minimum, the Solaris 9 OS version of SMS 1.6 requires:

http://sunsolve.sun.com

Solaris 10 OS Requirements

As a minimum, the Solaris 10 OS version of SMS 1.6 requires:


General Notes and Issues

This section contains general notes and issues that involve SMS on Sun Fire high-end systems.

smsconnectsc Command

smsconnectsc is intended to be used in the event a remote SC hangs and cannot be accessed normally through login. Using smsconnectsc to create a remote console session from the local SC can result in the local SC losing monitoring capability and functionality. Do not use smsconnectsc except for the express purpose of system recovery.

Valid Paths for Version Switching

You can use the smsversion script to switch to any version of SMS that is still installed on your system, with these exceptions:

This switching of SMS versions only applies if you have the same Solaris OS version running. The version switching does not apply if you have upgraded the Solaris OS version. Refer to previous versions of SMS Installation Guides for installation instructions prior to SMS 1.6.

For more information about version switching and its relationship to the Solaris OS, refer to the System Management Services (SMS) 1.6 Installation Guide.

Using ssh With SMS

Before installing the SMS 1.6 packages, make sure that you have serial or console access to the SC or have ssh available on the SC. After you install SMS 1.6 and reboot the SC, the hardening performed by the smsinstall script disables remote access. This hardening takes place due to the secure by default feature in SMS 1.6. If you do not have ssh available on your system, you will not have access to the SC except by using the console cable.



Note - If you are using ssh on the SC, you must change the ssh escape character to avoid conflict with the SMS console. Refer to the System Management Services (SMS) 1.6 Installation Guide for more information.




SMS Documentation Part Numbers

Software documentation for this release is provided at:

http://www.sun.com/products-n-solutions/hardware/docs/Servers/High-End_Servers/Sun_Fire_15K/SW_FW_Documentation/SMS/index.html

Files are named by part numbers. The part numbers correspond to these document titles:



Note - There is no longer a separate Dynamic Configuration User Guide for SMS software. The DR information for SMS now resides in the Sun Fire High-End and Midrange Systems Dynamic Reconfiguration User Guide.