test

Solstice X.25 9.2 Administration Guide

Configuring V.25bis Calling Procedures

V.25bis calling procedures are used to control the modem for a dial-up link. You must specify that V.25bis calling procedures are to be used. The parameters you need are located in the LAPB and WAN Parameters window. To configure the parameters:

  1. Display the LAPB and WAN Parameters window.

    In the Link Editor, click on the LAPB,WAN button, which is located under Advanced Configuration. The LAPB and WAN Parameters window appears.

  2. Choose V25 Calling procedures.

    Pull down the Calling Procedure menu and choose V25.

  3. Set the V25 Call Request Timer.

    This determines the length of time, in tenths of a second, that your machine will continue trying to connect to the remote network before timing out. If your modem supports call fail indications, set the V25 Call request timer to 0. Check with your modem supplier to find out if this is the case.