The X.25 network will automatically start the next time you reboot the machine.
The X.25 network will not automatically start when you reboot the machine. If you want to bring up the network later, then you must select Network => Start X.25.
This starts the SNMP agent when you start X.25 or reboot the machine. The SNMP agent allows access to the MIB through SNMP (the Simple Network Management Protocol). For more information on the SNMP agent, see Appendix E, Using the Solstice X.25 SNMP Agent.
The SNMP agent will not be started when you start X.25 or reboot the machine.
When x25tool is set to static mode, any changes you make will not be applied to the currently running configuration. However, if you save the changes to the default configuration files, they will come into effect the next time you stop and restart the Solstice X.25 software.
When x25tool is set to dynamic mode, any change you make will affect existing X.25 connections, and may disrupt users, so use caution. Changes to the dynamic configuration are made in the kernel and are lost the next time you restart the Solstice X.25 software, unless you save the changes.