3.2.3 What to Do

1. Remove the new memory module from its antistatic packaging.

2. Locate the socket into which you will install the module.

3. Position the module so that the small notch on the bottom corner of the module is at the same end as the socket's ejection lever.

   

4. Align the module with its socket until it contacts the socket evenly along the socket's length.

5. Press firmly down on both corners of the module until the bottom edge is firmly seated in the socket.

   You will hear a clicking sound when the module is fully seated.

6. Repeat Steps 3 through 5 for each module you want to install.