test

Sun Enterprise 220R Server Service Manual

4.6.2 What to Do

  1. If necessary, remove the plastic filler panel from the removable media assembly plastic cover.

    On the back side of the RMA cover, push the filler panel retainer tabs inward to disengage the filler panel.

  2. If you are replacing a defective drive, make sure that the jumper settings on the new drive match the settings on the old drive.

  3. Slide the CD-ROM or tape drive into its drive bay.

    Align the two screw holes on each side of the drive with the corresponding holes in each side of the drive bay.

    Graphic

  4. Insert and tighten the four flat-head Phillips screws that secure the drive in its bay.

    There are two screws on each side that secure the drive in the RMA.