GO-Joe Server Software

GO-Joe server software resides in the Misc directory on the Netra j 2.0 CD-ROM but is not automatically installed with Netra j 2.0. This software should be installed on the JavaStation X server, which can be the Netra j server itself or another system on the network. GO-Joe server software can be installed using either Admintool or pkgadd.

To install GO-Joe server software on a non-Solaris system, follow the vendor's instructions for adding a package to the system.

GO-Joe client software is installed on the Netra j server during the Netra j 2.0 installation. For information on setting up JavaStation computers to use GO-Joe client software, refer to the Netra j Administrator's Guide.

To Install GO-Joe Server Software Using Admintool

1. Insert the Netra j 2.0 CD-ROM into the X server's CD-ROM drive.

2. Mount the CD-ROM as described on "To Mount the Netra j 2.0 CD-ROM".

3. Change to the /usr/sbin directory.

   # cd /usr/sbin

4. Start Admintool by typing swmtool.

   # ./swmtool

   The Admintool: Software window is displayed.

5. Choose Edit Add.

   The Admintool: Set Source Media window is displayed.

6. Select CD with Volume Management if you are running Volume Management or CD without Volume Management as your Software Location.

7. Type the path to the source media in the CD path.

   /cdrom/cdrom0/Misc

   The Admintool: Add Software window is displayed.

8. Check the GO-Joe Host Software box.

9. Click Add.

   The GO-Joe server software is installed on your system.

10. Choose File Exit to close Admintool.

To Install GO-Joe Server Software Using pkgadd

1. Insert the Netra j 2.0 CD-ROM into the X server's CD-ROM drive.

2. Mount the CD-ROM as described on "To Mount the Netra j 2.0 CD-ROM".

3. Type the following commands:

   # cd /cdrom/cdrom0/Misc# pkgadd -d . SUNWgjvxs