Netra j 3.0 Installation Guide

Obtaining the Netra j 3.0 Software

You can obtain the Netra j 3.0 software by downloading it from the Web or from the Netra j 3.0 CD.

To Download the Software From the Web

The Netra j 3.0 software is provided as self-extracting archives to make it easier to transfer over the Internet. To receive the complete Netra j 3.0 software collection, download all of the available archives.

In your web browser, go to:

http://www.sun.com/netra-j

Find the Netra j 3.0 software and follow the instructions to register yourself and obtain privileges to download the software.

Click on the appropriate links to initiate a download, and specify the directory where you want to save the archives.

For low-encryption English locales, select these self-extracting archives:

netraj30file_1lo.bin [compressed: 5Mb]
netraj30file_2lo.bin [compressed: 30Mb]
netraj30file_3lo.bin [compressed: 30Mb]
netraj30file_4lo.bin [compressed: 20Mb]
solaris251addonslo.bin [compressed: 20Mb]
solaris26addonslo.bin [compressed: 10Mb]

For high-encryption English locales, select these self-extracting archives:

netraj30file_1hi.bin [compressed: 5Mb]
netraj30file_2hi.bin [compressed: 30Mb]
netraj30file_3hi.bin [compressed: 30Mb]
netraj30file_4hi.bin [compressed: 20Mb]
solaris251addonshi.bin [compressed: 20Mb]
solaris26addonshi.bin [compressed: 10Mb]

For non-English locales, select these self-extracting archives:
```
Refer to the product notes for updated L10N information.
```

Download either of the last two archives according to the version of the Solaris operating environment you are using.

Open a shell window, log in to the download directory, and verify the archives are present.

In the following procedures, this directory is referred to as download_directory.

Change the properties of each archive downloaded to executable, and then run it.

For example:
```
% chmod +x netra30file_1lo.bin
% ./netraj30file_1lo.bin
```
Each archive will extract several packages to download_directory.

Remove the original archives.

For example:

% rm netraj30file_1lo.bin
% rm netraj30file_2lo.bin
% rm netraj30file_3lo.bin
% rm netraj30file_4lo.bin
% rm solaris251addonslo.bin
% rm solaris26addonslo.bin

To Obtain the CD From the Web

The Netra j 3.0 software is available on the Netra j 3.0 CD, part number 798-1356-10. You can order the CD from your Sun Microsystems reseller or from the Web.

In your web browser, go to:

http://www.sun.com/netra-j

Find the Netra j 3.0 software and follow the instructions to register yourself and order the Netra j 3.0 CD.

To Mount the CD

As superuser, open a shell window and type this command to open the CD-ROM drive.
```
# cd / ; eject cdrom
```

Place the Netra j 3.0 CD into the drive tray and gently push the tray closed.

Note -
If your File Manager window opens when you insert the CD, quit the File Manager window immediately. You must use only the command line interface to install or upgrade to the Netra j 3.0 software.