-C H A P T E R

C H A P T E R 1

Introduction

This chapter provides an overview of the Netra CT server's basic hardware components and describes the different models available for the server. Contact Sun Microsystems to get the NEBS testing information for the Netra CT server.

The Netra CT server is a CompactPCI-based, NEBS (level 3)-certified, ETSI compliant, rack mountable server. The Netra CT server is highly configurable. Within the Netra CT chassis, you can have one to two Netra CT 810 servers or one to four Netra CT 410 servers.

Note - You can also have a mix of Netra ct 800 servers and Netra ct 400 servers. Refer to the documentation that came with those systems for more information.

The Netra CT server runs the standard Solaris operating environment, so that your Solaris applications can run on the server with no modifications.

The Netra CT server complies to the following specifications:

PICMG 2.0 R3.0 CompactPCI specifications

PICMG 2.1 R2.0 CompactPCI Hot Swap specifications

PICMG 2.5 R1.0 CompactPCI Computer Telephony/H.110 specifications

PICMG 2.9 R1.0 CompactPCI IPMI specifications

PICMG 2.14 R1.0 CompactPCI MCNet specifications

The hardware components for the Netra CT server can be broken down into three sections:

The chassis--Chapter 2

The servers that go into the chassis--Chapter 3

The components that go into the servers--Chapter 4

FIGURE 1-1 shows the possible configurations for the Netra CT 810 server. FIGURE 1-2 shows the possible configurations for the diskfull Netra CT 410 server and FIGURE 1-3 shows the possible configurations for the diskless Netra CT 410 server.

FIGURE 1-1 Components Within a Netra CT 810 Server

Figure showing a Netra CT 810 server and its components.

[ D ]

FIGURE 1-2 Components Within a Netra CT 410 Server, Diskfull Version

Figure showing a diskfull Netra CT 410 server and its components.

[ D ]

FIGURE 1-3 Components Within a Netra CT 410 Server, Diskless Version

Figure showing a diskless Netra CT 410 server and its components.

[ D ]