| Embedded Lights Out Manager Administration Guide |     |
Embedded Lights Out Manager Administration Guide
For the Sun Fire
X2200 M2 and Sun Fire X2100 M2 Servers
819-6588-14
|
Contents |
1. Embedded Lights Out Manager Overview
Embedded Lights Out Manager Features
Embedded Lights Out Manager Default Settings
2. Using the Embedded Lights Out Manager System
Embedded Lights Out Manager System Components
Accessing the Service Processor
Connecting Through the Serial Port
To Connect to the SP Through the Serial Port.
To View System Output Within CLI
To Set Up Serial Over LAN With the Solaris OS
To Set Up Serial Over LAN With Linux
To Connect to the SP Over the Ethernet
To View the System IP Address in the BIOS
3. Setting Up the Service Processor
Apply Standby Power for Initial Service Processor Configuration
Communicating with the System SP
Setting Up the Service Processor Using the Web-Based Interface
To Set Up the SP Using the Web-Based Interface
Configuring the IP Address Manually
To Configure the IP Addres Manually
4. Accessing and Monitoring the Server Using the Web-Based Interface
Accessing the System Using the Web-Based Interface
To Access the System Using the Web-Based Interface
Using the System Information Screens
Getting System Version Information
To Access the SP Version Screen
To Access the Server Board Version Screen
Getting System Components Information
To Access the Components Submenu Screens
To Access the Get NIC Information Screen
Using the System Monitoring Screens
Monitoring the System Using the Summary Screen
To Access the Temperature Screen
Examining, Saving, and Clearing the Event Log
To Examine the Event Logs Screen
Activating the System Indicator LED
To Activate the Locator Indicator Screen
5. Configuring and Managing the Server System Using the Web-Based Interface
Configuring the Network Settings
To Access the Network Settings Screen
To configure the Network Settings manually
To configure the Network Settings using DHCP
Setting Up E-Mail Notification
To set up E-Mail Notification:
Defining Traps with the Platform Event Filter
To Define Traps With the Platform Event Filter Screen
Configuring System Management Access
To Access the System Management Access Screens
To Configure SNMP Port and Permit
To Access the User Account Screen
Configuring Active Directory Service
To Configure Active Directory Service
To Access the Maintenance Screens
To Reset the Service Processor
6. Using the Remote Control Screens
About the Remote Console Application
Remote Console Operating Requirements
Launching the Remote Console Application
To Launch the Remote Console Application
Configuring KVM Functionality for a Remote Console Session
To Configure KVM Functionality for a Remote Console Session
Controlling Power to a Remote Server
To Access the Remote Power Control Submenu Screen
Installing an Operating System on a Remote Server
To Install an OS on a Remote Server Using Virtual CDROM
8. Using the Command-Line Interface
To Log In From the Serial Port
To Manage the Host Power State
Managing the ELOM Network Settings
To Display Version Information
9. Using Simple Network Management Protocol
To Add Your Server to Your SNMP Environment
To Configure Receipt of SNMP Traps
To Configure SNMP User Accounts
A. Command-Line Interface Reference
| Embedded Lights Out Manager Administration Guide | 819-6588-14 | |
Copyright © 2009 Sun Microsystems, Inc. All rights reserved.