Sun Ultra 27 Workstation Installation Guide

ProcedureTo Add and Remove Boot Devices

  1. Power on the workstation (see Powering the Workstation On and Off).

    The system boots.

  2. Press the F2 key during system boot.

    The BIOS Setup screen appears.

  3. Use the arrow keys to navigate to the Boot menu.

  4. In the Boot Settings menu, add or remove the device to or from the list of boot devices .

  5. If necessary, change the boot device priority by moving higher priority devices towards the top of the list.

  6. Press the F10 key to save your settings and exit.