Power off the workstation using the procedures described in the section, To Power Off the Workstation.
Remove the left-side access panel using the procedure described in the section, To Remove the Left-Side Access Panel.
Gently lay the system on its right side on a stable, nonslip surface.
Identify the location from which you will remove a DIMM.
To remove a DIMM press down on the ejector levers at both ends of the DIMM socket (see Figure 3–16).
This action ejects the DIMM from the socket.
Lift the DIMM and set it aside on an antistatic surface.
Choose the next step.
If you are installing a new DIMM, see the next section, To Install DIMMs.
If you are finished, close the workstation and prepare it for operation using the procedures described in the section, Closing the Workstation and Preparing for Operation.