This appendix lists the configuration rules for the Sun StorageTek SAS RAID Internal HBA.
Note - Use only Sun-approved devices and cabling with the HBA.
|
The appendix contains the following sections:
Target Devices
The following rules apply for supported target devices:
- Internal Enclosures:
- SAS/SATA backplane
- SASA/SATA backplane with SES-2 enclosure management support
Note - Enclosure cascading is not supported.
|
- SAS/SATA HDDs:
- Eight direct-attached per HBA (128 HDDs maximum via backplane SAS expander)
Note - Mixing SATA and SAS HDDs in the same logical RAID array is not supported. Although it is not an unsupported configuration, SAS and SATA HDDs must not be mixed in the same enclosure.
|
Cabling
Note - If you are installing the HBA on a Sun SPARC Enterprise T5120, T5220, T5140, or T5240 server, you will need different cables than the ones listed in this section. For more information about cabling for these servers, see the server-specific installation documentation listed in Related Documentation.
|
- SAS internal 4-lane cable with SFF-8087 host-side connector
- Maximum recommended length of 6 meters
- SATA internal x4 cable with mini-SAS
- Maximum length of 1 meter
Sun StorageTek SAS RAID HBA Installation Guide
|
820-1847-20
|
|
Copyright © 2010, Oracle and/or its affiliates. All rights reserved.