Figures |
FIGURE 1-1 Front View of a Sun StorEdge 3120 SCSI Array
FIGURE 1-2 Rear View of a JBOD
FIGURE 1-3 Optimized Architecture for Print Servers
FIGURE 1-4 Optimized Architecture for File Servers
FIGURE 1-5 Optimized Architecture for Application Servers
FIGURE 4-1 Front Bezel and Front Bezel Locks of an Array
FIGURE 4-2 Sequence of Steps to Change Front Bezel Locks So Keys Cannot Be Removed
FIGURE 4-3 Cord Lock Operation
FIGURE 4-4 Single-Bus Icon
FIGURE 4-5 Single-Bus Icon as it Appears on the Back of the JBOD
FIGURE 4-6 Drive IDs for Single-Bus and Split-Bus Configurations
FIGURE 4-7 Sun StorEdge 3120 SCSI Array Port Names
FIGURE 4-8 Cabling for Single-Bus JBOD
FIGURE 4-9 JBOD Directly Connected to a Host (Single-Bus)
FIGURE 4-10 Multiple JBODs Directly Connected to a Host (Single-Bus)
FIGURE 4-11 JBOD Directly Connected to Two Hosts (Single-Bus)
FIGURE 4-12 JBOD Directly Connected to a Host (Split-Bus)
FIGURE 4-13 JBODs Directly Connected to Hosts (Split-Bus)
FIGURE 4-14 Dual-Host, Multi-Initiator Array Connected to a Single JBOD
FIGURE 5-1 Single-Bus Configuration
FIGURE 5-2 Split-Bus Configuration
FIGURE 5-3 View Enclosure Dialog Box
FIGURE 5-4 Enclosure Device Orientation
FIGURE 6-1 Front-Panel LEDs
FIGURE 6-2 Chassis Ear LEDs and Reset Button on Front Panel
FIGURE 6-3 Back-Panel LEDs
FIGURE 6-4 AC Power Supply and Fan Module
FIGURE 6-5 DC Power Supply and Fan Module
FIGURE 6-6 JBOD I/O Module
FIGURE 7-1 Sun StorEdge 3120 SCSI Array Enclosure Device Orientation
FIGURE 7-2 Troubleshooting Decision Tree for JBODs, Figure 1 of 2
FIGURE 7-3 Troubleshooting Decision Tree for JBODs, Figure 2 of 2
FIGURE 8-1 The Front View of a Drive Module Pulled Out of the Chassis
FIGURE 8-2 The Power Supply Partially Pulled out of the Chassis
FIGURE 8-3 The Power Supply Partially Pulled out of the Chassis
FIGURE 8-4 Removing the Right Ear Cap
FIGURE 8-5 Removing the Ball Studs
FIGURE 8-6 Removing the LED Module From the Chassis
FIGURE 8-7 Detaching the Ribbon Cable From the LED Module
FIGURE 8-8 Removing the Screws Holding the LED Module
FIGURE 8-9 Detaching the LED Module From the Bracket
FIGURE 8-10 Inserting the Ribbon Cable Into the Cable Lock Drawer
FIGURE A-1 SCSI Host or Drive Connector
FIGURE A-2 Cross-section of the 68-Conductor SCSI Pinout for LVD/MSE SCSI
Copyright © 2007, Dot Hill Systems Corporation. All rights reserved.