- Book Information
- Index
- Preface
- Chapter 1 Product Overview
- Chapter 2 Fibre Channel Configuration Overview
- Chapter 3 Administering Multipathing
Devices Through mpathadm Commands
- Administering Multipathing Devices
- To Get a List of Multipathing Support That Can Be Administered by the mpathadm Command
- To Get the Multipathing Support Properties
- To Get a List of Initiator Ports Discovered on the System
- To Get the Properties of a Particular Initiator Port
- To Get a List of Logical Units Discovered on the System
- To Get the Properties and Associated Path Information of a Particular Logical Unit by Name
- To List All Logical Units Associated With a Particular Target Port
- To List a Logical Unit With a Particular Name Derived From the Hardware Used by the System
- To Configure Auto-Failback for a Particular Multipathing Support
- To Fail Over a Logical Unit
- To Enable a Path
- To Disable a Path
- Administering Multipathing Devices
- Chapter 4 Configuring Multipathing Software
- Chapter 5 Configuring SAN Devices
- Chapter 6 Configuring SAS Domains
- Chapter 7 Configuring IPFC SAN Devices
- Chapter 8 Sun Solaris 10 Update 6 x86/x64 Fibre Channel Operating System Booting Procedure
- Chapter 9 Persistent Binding for Tape Devices
- Appendix A Manual Configuration for Fabric-Connected
Devices
- Manual Configuration
- Fabric Device Node Configuration
- Configuring Device Nodes Without Multipathing Enabled
- Configuring Device Nodes With Solaris Multipathing Software Enabled
- Unconfiguring Fabric Devices
- Unconfiguring a Fabric Device
- To Unconfigure a Fabric Device
- To Unconfigure All Fabric Devices on a Fabric-Connected Host Port
- To Unconfigure a Fabric Device Associated With Sun StorageTek Traffic Manager Multipathing-Enabled Devices
- To Unconfigure One Path to a Multipathing Device
- To Unconfigure All Fabric-Connected Devices With Multipathing Enabled
- Unconfiguring a Fabric Device
- Appendix B Supported FC-HBA API
- Appendix C Multipathing Troubleshooting