| Skip Navigation Links | |
| Exit Print View | |
|
Sun Fire X4640 Server Product Documentation Sun Fire X4640 Server Documentation Library |
| Skip Navigation Links | |
| Exit Print View | |
|
|
Sun Fire X4640 Server Product Documentation Sun Fire X4640 Server Documentation Library |
Get Software and Firmware Downloads
About This Documentation (PDF and HTML)
Hardware Installation and Product Notes
Sun Fire X4640 Server Front and Back Panel Features and Components
Installing the Server Hardware
Removing the Server From the Rack
Getting Service for Your Server
Sun Fire X4640 Server Specifications
Communicating With the ILOM and the System Console
Setting Up Your Operating System
Overview of the Sun Fire X4640 Server Product Notes
Supported Software and Firmware
Solaris Operating System Issues
Windows Operating System Issues
VMware ESX and VMware ESXi Issues
Sun Installation Assistant Issues
MegaRAID Storage Manager (MSM) Issues
Integrated Lights Out Manager (ILOM) Issues
Introduction to Sun Installation Assistant
Getting Started With Sun Installation Assistant
Starting SIA and Preparing for Deployment or Recovery Tasks
Using SIA to Upgrade System Firmware
Using SIA to Recover a Service Processor
Performing an SIA PXE-Based Attended Installation
Performing an SIA PXE-Based Unattended Installation
Observing an SIA PXE-Based Unattended Installation
Creating a Bootable SIA USB Flash Drive
Identifying a Linux Boot Device on a Sun Fire X4500 Server
Introduction to Solaris OS and OpenSolaris Installation
Installing the Solaris 10 Operating System
Installing the OpenSolaris Operating System
Booting From OS Distribution Media
Identifying Logical and Physical Network Interface Names for Solaris OS Installation
Preliminary Tasks Before Installing An OS
Introduction to Linux Installation
Sun Installation Assistant (SIA)
Installing Red Hat Enterprise Linux
Installing and Updating SUSE Linux Enterprise Server
Configuring a Linux Server to Support PXE Installation
Booting From OS Distribution Media
Preliminary Tasks Before Installing An OS
Identifying Logical and Physical Network Interface Names for Linux OS Configuration
Introduction to Windows Installation
Sun Installation Assistant (SIA)
Getting Started With Windows Server 2008 Installation
Selecting a Media Delivery Method
Installing Windows Server 2008
Updating Critical Drivers and Installing Supplemental Software
Incorporating Sun Fire Drivers Into a WIM Image
Identifying Network Interfaces in Windows
Introduction to ESX Installation
Installing VMware ESXi 4.0 Installable
Booting From OS Distribution Media
Preliminary Tasks Before Installing An OS
Administration, Diagnostics, and Service
Overview of the ILOM Supplement
Communicating With the ILOM and the System Console
Using ILOM to Monitor the Host
Overview of the Diagnostics Guide
Introduction to System Diagnostics
Using the ILOM to Monitor the Host
Using SunVTS Diagnostics Software
Creating a Data Collector Snapshot
Sun Fire X4640 Server Service Manual Overview
Controlling Power and Performing Hardware Reset
Removing and Installing Components
Configuring the System Using the BIOS Setup Utilities
How to Attach the Cable Management Arm (CMA)Installing the Cable Management Arm (CMA)How to Remove the Cable Management Arm (CMA)How to Verify Cable Management Arm (CMA) OperationCabling DiagramHow to Clear Faults From the System Event Log Using the ILOM Command-Line InterfaceHow to Clear Faults From the System Event Log Using the ILOM Web InterfaceHow to Get the SP IP Address By Using a Serial Connection and the CLIHow to Connect to the ILOM Command-Line Interface Through the Serial Management PortHow to Get the SP IP Address By Using a Serial Connection and the CLIHow to Connect to the ILOM Command-Line Interface Through the Serial Management PortHow to Use the ILOM Command-Line Interface (CLI) to Control PowerSIA Version 2.3 Through 2.4 Features and BenefitsCompatible RacksConfiguring a Linux Server to Support PXE InstallationHow to Start SIA and Prepare for Tasks Using Local or Remote MediaHow to Get the SP IP Address By Using a Serial Connection and the CLIHow to Connect to the ILOM Command-Line Interface Through the Serial Management PortHow to Get the SP IP Address By Using a Serial Connection and the CLIHow to Connect to the ILOM Command-Line Interface Through the Serial Management Port(Optional) How to Redirect the Console Output to the Video PortContents of the Box and Optional Documentation Media KitIdentifying Correctable DIMM Errors (CEs)How to Isolate and Correct DIMM ECC ErrorsHow to Install the CoverHow to Update the Server CPLDsCPU Module Features and ComponentsHow to Install a CPU Module or Filler CardCPU Module Population RulesHow to Remove a CPU Module or Filler CardReplacing a CPU Module and Filler Card (CRU)CPU Module Slot DesignationsCPU Module Slot Designations and Population RulesHow to Update CPU Module FRU InformationHow to Install a CPU Module or Filler CardHow to Remove a CPU Module or Filler CardReplacing a CPU Module and Filler Card (CRU)How to Create a PXE Installation Image for Red Hat LinuxCreating a PXE Image for SUSE LinuxList of Customer Replaceable Units and Field Replaceable Units
|