S
- SCSI drivers
- updating
- Red Hat Enterprise Linux, How to Update the RHEL SCSI Drivers
- sensor readings, Using the ILOM to Monitor the Host
- using the ILOM command-line interface, How to Use the ILOM Command-Line Interface to View the Sensor Readings
- using the ILOM web interface, How to Use the ILOM Web Interface to View the Sensor Readings
- serial console
- connecting
- How to Connect to the Serial Console Using the ILOM Command-Line Interface
- How to Connect to the Serial Console Using the ILOM Command-Line Interface
- serial management port
- connecting to the ILOM CLI
- How to Get the SP IP Address By Using a Serial Connection and the CLI
- How to Connect to the ILOM Command-Line Interface Through the Serial Management Port
- How to Get the SP IP Address By Using a Serial Connection and the CLI
- How to Connect to the ILOM Command-Line Interface Through the Serial Management Port
- serial number, How to Find the Server's Serial Number
- server
- back panel, Cabling Diagram
- cabling, Cabling Diagram
- inserting into rack, How to Insert the Server Into the Rack
- powering off, How to Power Off the Server
- powering on, How to Apply Standby Power for Initial Service Processor Configuration
- removing
- How to Remove the Server From the Rack
- How to Remove the Server From the Rack
- serial number, How to Find the Server's Serial Number
- server connectors
- Server Connections
- Server Connections
- servers supported with SIA, Supported Servers and SIA Media Availability
- service, requesting, How to Find the Server's Serial Number
- service console, vSphere4.0, How to Identify the Network Interface
- service processor board
- installing, How to Install the Service Processor Board
- removing, How to Remove the Service Processor Board
- Service Processor ILOM, description, Diagnostic Tools
- service processor interfaces
- About ILOM SP IP Addresses and the ILOM Interfaces
- About ILOM SP IP Addresses and the ILOM Interfaces
- service processor IP addresses
- accessing through BIOS
- How to Get the SP IP Address Using the BIOS Setup Utility
- How to Get the SP IP Address Using the BIOS Setup Utility
- accessing through serial connection
- How to Get the SP IP Address By Using a Serial Connection and the CLI
- How to Get the SP IP Address By Using a Serial Connection and the CLI
- determining
- Determining the SP IP Address
- Determining the SP IP Address
- overview
- About ILOM SP IP Addresses and the ILOM Interfaces
- About ILOM SP IP Addresses and the ILOM Interfaces
- Service Processor recovery using SIA
- Sun Installation Assistant (SIA)
- Sun Installation Assistant (SIA)
- service processor (SP)
- powering, About Power Modes
- updates, BIOS and Service Processor Updates
- Service tags, description, Installing Service Tags
- service visit information, gathering, How to Gather Service Visit Information
- servicing, preparing for, How to Prepare the Server for Service
- setting up OS, Setting Up Your Operating System
- shutdown procedure, How to Inspect the Inside of the Server
- SIA
- configuring network information, How to Start SIA and Prepare for Tasks Using Local or Remote Media
- description, Getting Started With Sun Installation Assistant
- features and benefits, SIA Version 2.3 Through 2.4 Features and Benefits
- Linux installation prerequisites, How to Install Linux With SIA Using Local or Remote Media
- obtaining SIA media, Supported Servers and SIA Media Availability
- obtaining updates, Supported Servers and SIA Media Availability
- starting and preparing for tasks, How to Start SIA and Prepare for Tasks Using Local or Remote Media
- supplemental instructions for identifying the Linux boot device on a Sun Fire X4500 server, Identifying a Linux Boot Device on a Sun Fire X4500 Server
- supported operating systems, Supported Operating Systems
- supported servers, Supported Servers and SIA Media Availability
- tasks, SIA Task List
- USB flash drive support, Creating a Bootable SIA USB Flash Drive
- Windows installation prerequisites, How to Install Windows With SIA Using Local or Remote Media
- slide rail kit, Slide Rail Kit
- slide rails, How to Install the Express Slide Rails Onto the Server and the Rack
- slide-rails, verifying operation, How to Verify Slide-Rail Operation
- snapshot
- creating with the ILOM command-line interface, How To Create a Snapshot With the ILOM Command-Line Interface
- creating with the ILOM web interface, How To Create a Snapshot With the ILOM Web Interface
- software version summary, System Software Release Summary
- Solaris, worksheet, Configuring the Preinstalled Solaris OS
- Solaris 10 installation
- documentation, Where to Find Solaris 10 Information
- installation methods, Solaris OS Installation Overview
- JumpStart, Solaris OS Installation Overview
- network interface names, Solaris OS Installation Overview
- overview, Solaris OS Installation Overview
- physical name, Solaris OS Installation Overview
- RAID arrays, Solaris OS Installation Overview
- task map, Solaris OS Installation Overview
- Solaris 10 operating system, Solaris 10 Operating System
- Solaris 10 Operating System
- identifying network interfaces by logical and physical names
- sys-unconfig command, How to Identify Logical and Physical Network Interface Names
- Solaris OS
- overview, Setting Up Your Operating System
- preinstallation configuration, Configuring the Preinstalled Solaris OS
- SP, See service processor (SP)
- SP SEL, time stamps, Interpreting Event Log Time Stamps
- SSH
- connecting to the ILOM CLI
- How to Connect to the Command-Line Interface Using SSH
- How to Connect to the Command-Line Interface Using SSH
- staff required, Tools and Staff Required
- standby power mode, See power modes
- Sun Installation Assistant (SIA)
- about
- Sun Installation Assistant (SIA)
- Sun Installation Assistant (SIA)
- obtaining the latest version
- Obtaining SIA
- Obtaining SIA
- supported tasks
- SIA Task Overview
- SIA Task Overview
- Sun Java Enterprise System (Java ES) software, Sun Java Enterprise System
- SunVTS, description, Diagnostic Tools
- SunVTS diagnostics software, Using SunVTS Diagnostics Software
- documentation, SunVTS Documentation
- introduction, Introduction to SunVTS Diagnostic Test Suite
- using to diagnose problems, How to Diagnose Server Problems With the Bootable Diagnostics CD
- supplemental software, How to Install Supplemental Software
- supported OSs, Supported Operating Systems
- supported servers, Supported Servers and SIA Media Availability
- supported Windows versions, Supported Windows Operating Systems
- support.oracle.com, Get Software and Firmware Downloads
- SUSE Enterprise Linux Server, installation, using remote media from a PXE-based network, How to Boot SIA From a PXE Server for an Attended Installation
- SUSE Linux Enterprise Server
- creating a PXE installation image, Creating a PXE Image for SUSE Linux
- distribution CDs
- list of, Overview of PXE Servers
distribution DVDs
- list of, Overview of PXE Servers
installing, Installing and Updating SUSE Linux Enterprise Server
- installing from a PXE server, How to Install RHEL and SUSE Linux From a PXE Server
- logical and physical interface names
- identifying, SUSE Linux – How to Identify Logical and Physical Network Interface Names While Installing the OS
PXE installation
- configuring neopxe daemon, How to Install and Configure the neopxe Boot Server Daemon
- configuring NFS service, How to Configure the NFS Service on Your PXE Server
- configuring TFTP service, How to Configure the TFTP Service on Your DHCP Server
- configuring the DHCP server, How to Install and Configure a DHCP Server
- disabling the firewall, How to Disable the Firewall for Red Hat Linux
- installing portmap, How to Install Portmap on Your DHCP Server
RAID arrays, Introduction to Installing SLES From Distribution Media
- updating, How to Update SLES
- SUSE Linux Enterprise Server installation, Installing Linux With SIA
- system event log, Viewing the ILOM System Event Log
- viewing with the ILOM command-line interface, How to View the System Event Log With the ILOM Command-Line Interface
- viewing with the ILOM web interface, How to View the System Event Log Using the ILOM Web Interface
- sys-unconfig command, Solaris, How to Identify Logical and Physical Network Interface Names