Index |
attaching rails to a standard 19-inch cabinet, 1
about installing data host software for non-Solaris host, 1
about IP addressing, 1
about IP addressing, 1
balancing expansion trays, 1
cabling a 1x3 configuration, 1
cabling a 1x4 configuration, 1
cabling a 1x5 configuration, 1
configuration naming convention, 1
installation checklist for, 1
powering on, 1
powering-off, 1
pre-installation process for, 1
to a Sun Rack II cabinet, 1
to a Sun StorEdge cabinet, 1
to a Telco 2-post rack, 1
to unthreaded cabinet, 1
with a universal kit to a standard Sun or 19-inch, 1
balancing expansion trays, 1
listed, 1
attaching rails to a standard 19-inch cabinet, 1
attaching rails to a Sun Expansion cabinet, 1
attaching rails to a Sun Fire cabinet, 1
attaching rails to a Sun Rack 900/1000, 1
attaching rails to a Sun Rack II cabinet, 1
controller tray slot, 1
installing a tray, 1
preparing for tray installation, 1
rail kit mounting hardware, 1
1x3 array configuration, 1
1x4 array configuration, 1
1x5 array configuration, 1
Ethernet ports directly to management host, 1
Ethernet ports to a management LAN, 1
Ethernet ports using a hub, 1
intertray connections, 1
power connections, cabinet, 1
tray power connections, 1
configuration naming convention, 1
Configuration wizard for DHCP, 1
array IP address, 1
DHCP IP address, 1
static IP addressing, 1
configuring DHCP IP addressing, 1
configuring IP addressing using the controller serial port, 1
connecting a data host through an FC switch, 1
connecting a terminal to a controller serial port, 1
connecting cabinet power cables, 1
connecting data hosts directly, 1
tray power, 1
connecting the management host, 1
contents, universal rail kit, 1
connecting a terminal to the serial port, 1
connecting Ethernet ports to a management LAN, 1
connecting Ethernet ports to directly to management host, 1
connecting using an Ethernet hub, 1
establishing communication between a terminal and the serial port, 1
using the serial port to configure IP addressing, 1
installation slot in cabinet, 1
ship kit contents, 1
controller tray configuration, 1
controller tray LEDs and switches, 1
connecting directly, 1
connecting through FC switches, 1
setting up, 1
about installing for a non-Solaris host, 1
installing for a non-Solaris host, 1, 2, 3
Configuration wizard for, 1
before you begin, 1
Solaris DHCP server setup, 1
Windows 2000 Advanced Server installation, 1
Windows 2000 Advanced Server requirements, 1
DHCP IP addressing, configuring, 1
enabling multipathing software, 1
establishing communication between a terminal and a controller serial port, 1
connecting directly to management host, 1
connecting to a management LAN, 1
connecting using a hub, 1
expansion tray, 1
balancing, 1
ship kit contents, 1
FC switch, connecting a data host through, 1
rail kits, 1
rail kits, listed, 1
hardware overview, 1
controller tray configuration in, 1
controller tray LEDs and switches in, 1
expansion trays in, 1
connecting data directly, 1
connecting data through a FC switch, 1
connecting for management, 1
setting up a data host, 1
Sun Rack 900/1000, 1
Sun Rack II, 1
Telco 2-post rack, 1
installing a tray in a cabinet, 1
installing data host software for non-Solaris host, 1, 2
intertray cabling, 1
1x3 configuration, 1
1x4 configuration, 1
1x5 configuration, 1
about, 1
configuring DHCP, 1
configuring static, 1
using the controller serial port, 1
listed, 1
front, 1
rear, 1
setting, 1
management host, connecting, 1
cabinet/rack hardware hardware, 1
multipathing software, enabling, 1
New Scope wizard, 1
part numbers, universal rail kit, 1
planning the tray installation order, 1
power, connecting cabinet cables, 1
power, connecting tray cables, 1
powering off the array, 1
array, 1
before powering-on, 1
preparing the cabinet for tray installation, 1
preparing the tray for installation, 1
product overview, 1
hardware, 1
controller tray configuration, 1
controller tray LEDs and switches, 1
expansion tray, 1
software, 1
rack, rail kit mounting hardware, 1
rackmount kit preparation, 1
rail kits, mounting hardware, 1
rail kits, unpacking, 1
attaching a universal kit to a standard Sun or 19-inch cabinet, 1
attaching to a standard 19-inch cabinet, 1
attaching to a Sun Expansion cabinet, 1
attaching to a Sun Fire cabinet, 1
attaching to a Sun Rack II cabinet, 1, 2
attaching to a Sun StorEdge cabinet, 1
attaching to a Telco 2-post rack, 1
attaching to standard 19-inch cabinet, 1
attaching to Sun Rack 900/1000, 1
attaching to unthreaded cabinet, 1
loosening length adjustment screws, 1
connecting a terminal, 1
establishing communication with a terminal, 1
using to configure IP addressing, 1
setting the tray link rate, 1
setting up a data host, 1
controller tray, 1
expansion tray, 1
enabling multipathing, 1
installing data host for non-Solaris host, 1, 2
overview, 1
static IP addressing, configuring, 1
connecting a data host through, 1
Tray Link Rate, 1
connecting to a controller serial port, 1
establishing communication with a controller serial port, 1
tools, required for tray installation, 1, 2
installation order, 1
installing, 1
intertray cabling, 1
preparing for installation, 1
preparing the cabinet for installation, 1
setting the link rate, 1
ship kit contents, 1
tools required for installation, 1
unpacking, 1
preparing the rackmount kit for, 1
tools required for, 1
Tray Link Rate switch, 1
attaching to a standard 19-inch cabinet, 1
attaching to a Sun Expansion cabinet, 1
attaching to a Sun Fire cabinet, 1
attaching to a Sun Rack 900/1000, 1
attaching to unthreaded cabinet, 1
contents, 1
part numbers, 1
unpacking, 1
unpacking a tray, 1
Copyright © 2010, Oracle and/or its affiliates. All rights reserved.