Figures

FIGURE 1-1 Sun StorageTek 6140 Array Product Overview

FIGURE 1-2 Controller Tray (Front View)

FIGURE 1-3 Controller Tray Port and Components (Back View)

FIGURE 1-4 Controller Tray LEDs and Indicators (Back View)

FIGURE 1-5 Battery Backup Compartment LEDs

FIGURE 1-6 Expansion Tray Ports and Components (Back)

FIGURE 1-7 Expansion Tray LEDs and Indicators (Back)

FIGURE 2-1 Loosening the Rail Screws to Adjust the Rail Length

FIGURE 2-2 Positioning the Front of the Left Rail Behind the Left Front Cabinet Rail

FIGURE 2-3 Securing the Left Rail to the Front of the Cabinet

FIGURE 2-4 Adjusting the Length of the Left Rail at the Back of the Cabinet

FIGURE 2-5 Securing the Left Rail to the Back of the Cabinet

FIGURE 2-6 Tightening the Rail Adjustment Screws

FIGURE 2-7 Inserting Rail Mounting Screws in Middle Holes of the Upper Mounting Unit of the Mounting Slot

FIGURE 2-8 Hanging the Rail

FIGURE 2-9 Inserting Screws in the Lower Side Mounting Holes of the Cabinet

FIGURE 2-10 Securing the Rail to the Front of the Cabinet

FIGURE 2-11 Inserting Cage Nuts Over Rail Mounting Holes in Cabinet Rails

FIGURE 2-12 Inserting the Cabinet Rail Adapter Plate on the Cabinet Rail

FIGURE 2-13 Securing the Rail to the Front of the Cabinet

FIGURE 2-14 Inserting A Cage Nut on the Cabinet Rail at the Rear of the Cabinet

FIGURE 2-15 Adjusting the Length of the Rail at the Back of the Cabinet

FIGURE 2-16 Securing the Rail to the Back of the Cabinet

FIGURE 2-17 Inserting Screws in the Front and Back Mounting Holes

FIGURE 2-18 Seating the Mounting Rails Over the Front and Back Screws

FIGURE 2-19 Inserting Screws in the Lower Mounting Holes

FIGURE 2-20 Inserting Screws in the Lower Mounting Holes

FIGURE 2-21 Positioning the Tray in the Rack

FIGURE 2-22 Sliding the Tray Into the Rack

FIGURE 2-23 Securing the Tray to the Front of the Rack

FIGURE 2-24 Securing the Tray to the Back of the Rack

FIGURE 2-25 Tightening the Locknuts on the Rail Extension.

FIGURE 2-26 Positioning the Tray in the Cabinet

FIGURE 2-27 Sliding the Tray Into the Cabinet

FIGURE 2-28 Securing the Tray to the Front of a Sun Rack 900/1000 Cabinet

FIGURE 2-29 Securing the Tray to the Front of a Sun StorEdge Expansion Cabinet

FIGURE 2-30 Securing the Tray to the Back of the Cabinet Rail

FIGURE 2-31 Expansion Ports on the Controller and Expansion Trays

FIGURE 2-32 1x2 Array Configuration Cabling

FIGURE 2-33 1x3 Array Configuration Cabling

FIGURE 2-34 1x4 Array Configuration Cabling

FIGURE 2-35 1x5 Array Configuration Cabling

FIGURE 2-36 1x6 Array Configuration Cabling

FIGURE 2-37 1x7 Array Configuration Cabling

FIGURE 3-1 Ethernet Ports for Controller A and Controller B

FIGURE 3-2 Host Connections

FIGURE 3-3 Connecting Data Hosts Through a Switch

FIGURE 3-4 Connecting Data Hosts Through a Switch With Cross-Connections

FIGURE 3-5 Direct Connection to Two Hosts With Dual HBAs

FIGURE 3-6 Direct Connection to Three Hosts With Dual HBAs

FIGURE 4-1 Tray Link Rate Switch

FIGURE 4-2 Tray Power Connectors and Switches

FIGURE A-1 Inserting a Disk Drive.

FIGURE A-2 Successfully Inserted Disk Drive

FIGURE A-3 Incorrect Method of Inserting a Hard Drive