Symptom |
Check List |
Solutions |
No images on the
screen. I cannot turn
on the monitor. |
Is the power cord connected
properly? |
Check the power cord connection and
supply. |
Can you see "No
Signal, Check Signal
Cable" on the screen? |
(Connected using the D-sub cable)
Check the signal cable connection.
(Connected using the DVI cable) If you still see an (error) message on the
screen when the monitor is connected
properly, check to see if the monitor status
is set to analog. Press Source button to
have the monitor double-check the input
signal source. |
Can you see "OUT OF FREQUENCY" on the
screen? |
You can see this message when the signal from
the video card exceeds the maximum resolution and frequency
that the monitor can properly handle.
Adjust the maximum resolution and
frequency that the monitor can properly
handle.
|
There is no image on the
screen. Is the power indicator
on the monitor AMBER? |
The monitor is in PowerSaver mode.
Press a key on the keyboard to activate the monitor and
restore the image on the screen.
If there is still no image, check input source Then press
any key on the keyboard again to activate the monitor and
restore the image on the screen.
|
Connected using the DVI
cable? |
You may get a blank screen if you boot the
system before you connect the DVI cable, or disconnect and
then reconnect the DVI cable while the system is running as
certain types of graphic cards do not send out video
signals. Connect the DVI cable and
then reboot the system. |
The screen shows
strange colors or just black and white. |
Is the screen displaying only
one color as if looking at the
screen through a cellophane
paper? |
Check the signal cable connection. Make sure the video
card is fully inserted in it's slot. |
Has the video card been set
properly? |
Set the video card by referring to the video card manual. |
The screen suddenly has
become unbalanced. |
Have you changed the video
card or the driver? |
Adjust screen image position and size using the OSD. |
Have you adjusted the
resolution or frequency to the
monitor? |
Adjust the resolution and frequency at the
video card.
(Refer to the Preset Display Modes). |
The screen can be unbalanced
due to the cycle of the video card signals. Readjust
Position by referring to the OSD. |
The screen is out of focus or OSD
cannot be adjusted. |
Have you adjusted the
resolution or frequency on
the monitor? |
Adjust the resolution and frequency of the video card.
(Refer to the Preset Display Modes). |
|
|
|
|
|
|