| Skip Navigation Links | |
| Exit Print View | |
|
Sun Blade Storage Module M2 Product Documentation |
About This Documentation (PDF and HTML)
Overview of the Sun Blade Storage Module M2
Installing the Storage Module Into the Chassis
Assigning and Managing Storage
Overview of the Sun Blade Storage Module M2 Product Notes
Supported Firmware, Hardware and Software
NEM 0 Cannot Be Empty (6956590)
Sun Blade X6270 M2 BIOS Can Only See 24 Drives (6929975)
Storage Module Shows Powered Off When It is Actually Powered On (6823893)
REM BIOS Configuration Utility Might Show a Single Path to Dual Path SAS Drives (6981082)
Solaris Operating System Issues
Performing Maintenance and Hot Plug Actions
Importing Existing Virtual Drives to a Replacement REM
Storage Module Sensors and Indicators
Introduction to the Sun Blade Storage Module M2
Maintaining the Sun Blade Storage Module M2
When assigning Sun Blade Storage Module M2 resources to hosts using the Sun Blade Zone Manager feature of the CMM ILOM, do not attempt hot plug actions to avoid timeout errors.
The following error might be seen in the Sun Blade Zone Manager window if you perform a hot plug action in the SAS-2 domain (comprised of SAS-2 servers, NEMs, and storage module resources) during the assigning of storage module resources:
If you need to perform a hot plug action to a component in the SAS-2 domain, refresh the Sun Blade Zone Manager window prior to saving configurations to ensure listed SAS devices match what's actually in the chassis.
|