System Administration Guide

Examples--Displaying System Configuration Information

The following prtconf output is displayed on a SPARC system.


# prtconf
System Configuration:  Sun Microsystems  sun4c
Memory size: 32 Megabytes
System Peripherals (Software Nodes):
SUNW,Sun 4_50
    packages (driver not attached)
        disk-label (driver not attached)
        deblocker (driver not attached)
        obp-tftp (driver not attached)
    options, instance #0
    aliases (driver not attached)
    openprom (driver not attached)
    zs, instance #0
    zs, instance #1
    audio (driver not attached)
    eeprom (driver not attached)
    counter-timer (driver not attached)
    memory-error (driver not attached)
    interrupt-enable (driver not attached)
    auxiliary-io (driver not attached)
    sbus, instance #0
        dma, instance #0
        esp, instance #0
            sd (driver not attached)
            st (driver not attached)
            sd, instance #0 (driver not attached)
            sd, instance #1 (driver not attached)
            sd, instance #2 (driver not attached)
            sd, instance #3
            sd, instance #4 (driver not attached)
            sd, instance #5 (driver not attached)
            sd, instance #6
.
.
.

The following sysdef output is displayed from an x86 system.


# sysdef
*
* Hostid
*
  24b02304
*
* i86pc Configuration
*
*
* Devices
*
eisa, instance #0
	kd, instance #0
	eha, instance #0
		cmdk, instance #0
		cmdk, instance #1 (driver not attached)
		cmdk, instance #2 (driver not attached)
		cmdk, instance #3 (driver not attached)
		cmdk, instance #4 (driver not attached)
		cmdk, instance #5 (driver not attached)
		cmdk, instance #6
.
.
.