This chapter contains the worksheets for gathering configuration information that is required during a Configure Now installation. These worksheets are companion tools for working with the configuration information in Chapter 3, Configuration Information. Worksheets are included only for the product components that can be configured by the Sun JavaTM Enterprise System (Java ES) installer.
This chapter contains the following sections:
Portal Server Secure Remote Access Configuration Information
Parameters Used Only in State Files Configuration Information
For detailed explanations of the fields in this worksheet, refer to the tables under Common Server Settings
Table 4–1 Common Server Settings Configuration Worksheet
Label and State File Parameter |
Data |
---|---|
Host Name CMN_HOST_NAME |
Your data: _____________________________________________________ The default value is the local host name. For example, mycomputer. |
DNS Domain Name CMN_DOMAIN_NAME |
Your data: _____________________________________________________ The default value is domain name for the local host. For example, .example.com. |
Host IP Address CMN_IPADDRESS |
Your data: _____________________________________________________ The default value is the IP address for the local host. |
Administrator User ID CMN_ADMIN_USER |
Your data: _____________________________________________________ Note: If you chose to use a single administrator account, this field is not present. |
Administrator Password CMN_ADMIN_PASSWORD |
Your data: _____________________________________________________ Note: If you chose to use a single administrator account, this field is not present. |
System User CMN_SYSTEM_USER |
Your data: _____________________________________________________ The default value is root. |
System Group CMN_SYSTEM_GROUP |
Your data: _____________________________________________________ The default value is root. |
This section contains worksheets for the following topics:
For detailed explanations of the fields in this worksheet, refer to the tables under Access Manager Administration Information.
Table 4–2 Access Manager Administration Information Configuration Worksheet
Label and State File Parameter |
Data |
---|---|
Install type AM_REALM |
Your data: _____________________________________________________ Legacy mode used by default. |
Administrator User ID IS_ADMIN_USER_ID |
Your data: amadmin Cannot be changed. |
Administrator Password IS_ADMINPASSWD |
Your data: _____________________________________________________ (must be at least eight characters) |
LDAP User ID IS_LDAP_USER |
Your data: amldapuser Cannot be changed. |
LDAP Password IS_LDAPUSERPASSWD |
Your data: ______________________________________________________ Restriction: Must be different from Administrator Password. |
Password Encryption Key AM_ENC_PWD |
Your data: ______________________________________________________ The password encryption key be 12 characters or longer for a new install, or it can be blank. For an upgrade, the password can be shorter. Required for a remote portal installation. |
The installer needs the following information if you are installing Access Manager Administration Console. There are two worksheets for Access Manager, one for each of the web containers in which you can deploy Access Manager:
For detailed explanations of the fields in this worksheet, refer to the tables under Access Manager With Application Server.
Table 4–3 Access Manager With Application Server Configuration Worksheet
Label and State File Parameter |
Data |
---|---|
Secure Server Instance Port IS_IAS81INSTANCE_PORT |
Your data: ________________________________________________________ The default value is 8080. |
Secure Administrator Server Port IS_IAS81_ADMINPORT |
Your data: ________________________________________________________ The default value is 4849. |
Administrator User ID IS_IAS81_ADMIN |
Your data: ________________________________________________________ The default value is the administrator user ID you provided under Common Server Settings. Note: If you chose to use a single administrator account, this field is not present. |
Administrator Password IS_IAS81_ADMINPASSWD |
Your data: ________________________________________________________ The default value is the Administrator User password you provided under Common Server settings. Note: If you chose to use a single administrator account, this field is not present. |
For detailed explanations of the fields in this worksheet, refer to the tables under Access Manager With Web Server.
Table 4–4 Access Manager With Web Server Configuration Worksheet
Label and State File Parameter |
Data |
---|---|
Host Name IS_WS_HOST_NAME |
Your data: ________________________________________________________ The default value is the fully qualified domain name for the current host. |
Administrator User ID IS_WS_ADMIN_ID |
Your data: ________________________________________________________ The default value is the administrator user ID you provided under Common Settings. |
Administrator Password IS_WS_ADMIN_PASSWORD |
Your data: ________________________________________________________ The default value is the administrator user ID you provided under Common Settings. |
Document Root Directory IS_WS_DOC_DIR |
Your data: ________________________________________________________ The default value is: Solaris OS: /var/opt/SUNWwbsvr7/https:-hostname.domain/docs Linux and HP-UX: /var/opt/sun/webserver7/https:-hostname.domain/docs |
Web Server Port IS_WS_INSTANCE_PORT |
Your data: ________________________________________________________ The default value is 80. |
Web Server Instance Directory IS_WS_INSTANCE_DIR |
Your data: ________________________________________________________ The path must have the following syntax: WebServer-base/https-webserver-instancename If you are installing Web Server in this session, the default value for WebServer-base is the Web Server installation directory: Solaris OS: /var/opt/SUNWwbsvr7 Linux and HP-UX: /var/opt/sun/webserver7 |
Web Server Protocol IS_WS_PROTOCOL |
Your data: ________________________________________________________ The default value is HTTP. |
You can install Access Manager in various ways:
Label and State File Parameter |
Data |
---|---|
Host Name IS_SERVER_HOST |
Your data: ________________________________________________________ |
Services Deployment URI SERVER_DEPLOY_URI |
Your data: ________________________________________________________ The default value is amserver. Note: Do not enter a leading slash. |
Common Domain Deployment URI CDS_DEPLOY_URI |
Your data: ________________________________________________________ The default value is amcommon. Note: Do not enter a leading slash. |
Cookie Domain COOKIE_DOMAIN_LIST |
Your data: ________________________________________________________ For example: .example.com Note: Leading period (.) is required. |
Password Deployment URI PASSWORD_SERVICE_DEPLOY_URI |
Your data: ________________________________________________________ The default value is ampassword. Do not enter a leading slash. |
Console Protocol CONSOLE_PROTOCOL |
Your data: ________________________________________________________ The default value is HTTP |
Label and State File Parameter |
Data |
---|---|
Administration Console USE_DSAME_SERVICES_WEB_CONTAINER CONSOLE_REMOTE |
Your data: ________________________________________________________ The default value is true (deploy new console). |
Console Deployment URI CONSOLE_DEPLOY_URI |
Your data: ________________________________________________________ The default value is amconsole. |
Console Host Name CONSOLE_HOST |
Your data: ________________________________________________________ The default value is based on the fully qualified domain name for this host. For example, mycomputer.example.com. |
Console Port CONSOLE_PORT |
Your data: ________________________________________________________ The default value is 8080. |
For detailed explanations of the fields in this worksheet, refer to the tables under Installing Access Manager Console (Core Already Installed).
Table 4–7 Access Manager Installing Console (Core Already Installed) Configuration Worksheet
Label and State File Parameter |
Data |
---|---|
Console Deployment URI CONSOLE_DEPLOY_URI |
Your data: ________________________________________________________ Only relevant for Legacy mode (6.x). The default value is: amconsole. Note: Do not enter a leading slash. |
Password Services Deployment URI PASSWORD_SERVICE_DEPLOY_URI |
Your data: ________________________________________________________ The default value is: ampassword. Note: Do not enter a leading slash. |
For detailed explanations of the fields in this worksheet, refer to the tables under Installing Access Manager Console (Core Not Already Installed).
Table 4–8 Installing Console (Core Not Already Installed) Configuration Worksheet
Label and State File Parameter |
Data |
---|---|
Console Deployment URI CONSOLE_DEPLOY_URI |
Your data: ________________________________________________________ The default value is amconsole. |
Password Services Deployment URI PASSWORD_SERVICE_DEPLOY_URI |
Your data: ________________________________________________________ The default value is ampassword, no leading slash. |
For detailed explanations of the fields in this worksheet, refer to the tables under Installing Federation Management (Core Already Installed).
Table 4–9 Installing Federation Management (Core Already Installed) Configuration Worksheet
Label and State File Parameter |
Data |
---|---|
Common Domain Deployment URI CDS_DEPLOY_URI |
Your data: ________________________________________________________ The default value is amcommon, no leading slash. |
For detailed explanations of the fields in this worksheet, refer to the tables under Access Manager Directory Server Information.
Table 4–10 Access Manager Directory Server Configuration Worksheet
Label and State File Parameter |
Data |
---|---|
Directory Server Host IS_DS_HOSTNAME |
Your data: ________________________________________________________ The default value is the fully qualified domain name of the local host. |
Directory Server Port IS_DS_PORT |
Your data: ________________________________________________________ The default value is 389. |
Access Manager Directory Root Suffix IS_ROOT_SUFFIX |
Your data: ________________________________________________________ The default value is based on the fully qualified domain name for this host, minus the host name. For example, if this host is siroe.subdomain.example.com , the value is dc=subdomain,dc=example,dc=com. |
Directory Manager DN IS_DIRMGRDN |
Your data: ________________________________________________________ The default value is cn=Directory Manager. |
Directory Manager Password IS_DIRMGRPASSWD |
Your data: ________________________________________________________ |
For detailed explanations of the fields in this worksheet, refer to the tables under Existing Provisioned Directory Found.
Table 4–11 Existing Provisioned Directory
Label and State File Parameter |
Data |
---|---|
User Naming Attribute IS_USER_NAMING_ATTR |
Your data: ________________________________________________________ The default value is uid. |
For detailed explanations of the fields in this worksheet, refer to the tables under No Existing Provisioned Directory Found.
Table 4–12 No Existing Provisioned Directory Found
Label and State File Parameter |
Data |
---|---|
Is Directory Server provisioned with user data? IS_LOAD_DIT |
Your data: ________________________________________________________ The default value is No. |
Organization Marker Object Class IS_ORG_OBJECT_CLASS |
Your data: ________________________________________________________ The default value is SunISManagedOrganization. |
Organization Naming Attribute IS_ORG_NAMING_ATTR |
Your data: ________________________________________________________ The default value is o. |
User Marker Object Class IS_USER_OBJECT_CLASS |
Your data: ________________________________________________________ The default value is inetorgperson. |
User Naming Attribute IS_USER_NAMING_ATTR |
Your data: ________________________________________________________ The default value is uid. |
This section contains the following topics:
For detailed explanations of the fields in this worksheet, refer to the tablesAccess Manager SDK Administration Information.
Table 4–13 Access Manager SDK Administration Configuration Worksheet
Label and State File Parameter |
Data |
---|---|
Administrator User ID IS_ADMIN_USER_ID |
Your data: _____________________________________________________ The default name, amadmin, cannot be changed. |
Administrator Password IS_ADMINPASSWD |
Your data: _____________________________________________________ Set this value to the same value used by Access Manager on the remote host. |
LDAP User ID IS_LDAP_USER |
Your data: _____________________________________________________ The default user name, amldapuser, cannot be changed. |
LDAP Password IS_LDAPUSERPASSWD |
Your data: _____________________________________________________ Set this value to the same value used by Access Manager on the remote host. |
Password Encryption Key AM_ENC_PWD |
Your data: _____________________________________________________ The password encryption key be 12 characters or longer for a new install, or it can be blank. For an upgrade, the password can be shorter. Required for a remote portal installation. |
For detailed explanations of the fields in this worksheet, refer to the tablesAccess Manager SDK Directory Server Information.
Table 4–14 Access Manager SDK Directory Server Configuration Worksheet
Label and State File Parameter |
Data |
---|---|
Directory Server Host IS_DS_HOSTNAME |
Your data: _____________________________________________________ Set this value to the same value used by Access Manager on the remote host. |
Directory Server Port IS_DS_PORT |
Your data: _____________________________________________________ Set this value to the same value used by Access Manager on the remote host. |
Access Manager Directory Root Suffix IS_ROOT_SUFFIX |
Your data: _____________________________________________________ Set this value to the same value used by Access Manager on the remote host. The default value is based on the fully qualified domain name for this host, minus the host name. For example, if this host is siroe.subdomain.example.com , the value is dc=subdomain,dc=example,dc=com. Use this default value as an example of format only. |
Directory Manager DN IS_DIRMGRDN |
Your data: _____________________________________________________ Set this value to the same value used by Access Manager on the remote host. The default value is cn=Directory Manager. |
Directory Manager Password IS_DIRMGRPASSWD |
Your data: _____________________________________________________ Set this value to the same value used by Access Manager on the remote host. |
For detailed explanations of the fields in this worksheet, refer to the tablesAccess Manager SDK Provisioned Directory Information.
Table 4–15 Access Manager SDK Provisioned Directory Configuration Worksheet
Label and State File Parameter |
Data |
---|---|
User Naming Attribute IS_USER_NAMING_ATTR |
Your data: ________________________________________________________ The default value is uid. |
If the installer finds an existing provisioned directory, you provide the following information.
For detailed explanations of the fields in this worksheet, refer to the tables Existing Provisioned Directory Found.
Table 4–16 Existing Provisioned Directory Information for Access Manager SDK
Label and State File Parameter |
Data |
---|---|
User Naming Attribute IS_USER_NAMING_ATTR |
Your data: _____________________________________________________ The default value is uid. |
For detailed explanations of the fields in this worksheet, refer to the tables No Existing Provisioned Directory Found.
Table 4–17 No Existing Provisioned Directory Information for Access Manager SDK
Label and State File Parameter |
Data |
---|---|
Is Directory Server provisioned with user data? IS_LOAD_DIT |
Your data: _____________________________________________________ The default value is No. |
Organization Marker Object Class IS_ORG_OBJECT_CLASS |
Your data: _____________________________________________________ The default value is SunISManagedOrganization. |
Organization Naming Attribute IS_ORG_NAMING_ATTR |
Your data: _____________________________________________________ The default value is o. |
User Marker Object Class IS_USER_OBJECT_CLASS |
Your data: _____________________________________________________ The default value is inetorgperson. |
User Naming Attribute IS_USER_NAMING_ATTR |
Your data: _____________________________________________________ The default value is uid. |
For detailed explanations of the fields in this worksheet, refer to the tablesAccess Manager SDK Web Container Information.
Table 4–18 Access Manager SDK Web Container Configuration Worksheet
Label and State File Parameter |
Data |
---|---|
Host IS_WS_HOST_NAME |
Your data: _____________________________________________________ There is no default value. |
Services Deployment URI SERVER_DEPLOY_URI |
Your data: _____________________________________________________ The default value is amserver. Do not enter a leading slash. |
Cookie Domain COOKIE_DOMAIN_LIST |
Your data: _____________________________________________________ The default value is the current domain, prefixed by a dot (.), such as .example.com. |
Web Container Hostname IS_SERVER_HOST |
Your data: _____________________________________________________ |
Web Container Port IS_SERVER_PORT |
Your data: _____________________________________________________ |
Web Container Protocol IS_SERVER_PROTOCOL |
Your data: _____________________________________________________ |
Services Port IS_WS_INSTANCE_PORT IS_IAS81INSTANCE_PORT |
Your data: _____________________________________________________ Use the port number specified when Access Manager core services were installed. Web Server is default 80, (Application Server is 8080. |
This section contains worksheets for the following topics:
For detailed explanations of the fields in this worksheet, refer to the tables under Access Manager Configuration Information.
For detailed explanations of the fields in this worksheet, refer to the tables under Application Server Administration Information.
Table 4–19 Application Server Administration Configuration Worksheet
Label and State File Parameter |
Data |
---|---|
Admin User Name AS_ADMIN_USER_NAME |
Your data: _____________________________________________________ The default value is the Administrator User ID you provided under Common Server Settings. Refer to Common Settings. Note: If you chose to use a single administrator account, this field is not present. |
Password AS_PASSWORD |
Your data: _____________________________________________________ The default value is the Administrator Password you provided under Common Server Settings. Minimum of 8 characters. Refer to Common Settings. Note: If you chose to use a single administrator account, this field is not present. |
Admin Port AS_ADMIN_PORT |
Your data: _____________________________________________________ The default value is 4849. |
JMX Port AS_JMX_PORT |
Your data: _____________________________________________________ The default value is 8686. |
HTTP Server Port AS_HTTP_PORT |
Your data: _____________________________________________________ The default value is 8080. If the installer detects that the default port is used, an alternative value is suggested. |
HTTPS Port AS_HTTPS_PORT |
Your data: _____________________________________________________ The default value is 8181. |
Master Password AS_MASTER_PASSWORD |
Your data: _____________________________________________________ The default value is the Administrator Password you provided under Common Server Settings. Minimum of 8 characters. |
For detailed explanations of the fields in this worksheet, refer to the tables under Application Server Node Agent Information.
Table 4–20 Application Server Node Agent Configuration Worksheet
Label and State File Parameter |
Data |
---|---|
Admin Host Name ASNA_ADMIN_HOST_NAME |
Your data: _____________________________________________________ The default value is the name of local host, including domain. |
Admin User Name ASNA_ADMIN_USER_NAME |
Your data: _____________________________________________________ The default value is the Administrator User ID you provided under Common Server Settings. Note: If you chose to use a single administrator account, this field is not present. |
Password ASNA_PASSWORD |
Your data: _____________________________________________________ Password for the Application Server admin user. There is no default value. Note: If you chose to use a single administrator account, this field is not present. |
Master Password ASNA_MASTER_PASSWORD |
Your data: _____________________________________________________ Default value is the admin password you provided under Common Server Settings. |
Admin Port ASNA_ADMIN_PORT |
Your data: _____________________________________________________ The default value is 4849. |
Node Agent Name ASNA_NODE_AGENT_NAME |
Your data: _____________________________________________________ Name of the local node. The default value is the local host name. |
For detailed explanations of the fields in this worksheet, refer to the tables under Application Server Load Balancing Plugin Information.
Table 4–21 Application Server Load Balancing Plugin Configuration Worksheet
Label and State File Parameter |
Data |
---|---|
Web server that the load balancing plugin will use AS_WEB_SERVER_PLUGIN_TYPE |
Your data: _____________________________________________________ The default value is Sun Java System Web Server. Note: HP-UX does not support Apache Web Server. |
Web server installation directory AS_WEB_SERVER_LOCATION |
Your data: _____________________________________________________ The default value is: Solaris OS: /opt/SUNWwbsvr7 Linux and HP-UX: /opt/sun/webserver7 |
Web Server instance directory CMN_WS_INSTANCE_DIR |
Your data: _____________________________________________________ The default value is: Solaris OS: /var/opt/SUNWwbsvr7 Linux and HP-UX: /var/opt/sun/webserver7 |
This sections contains worksheets for the following topics:
For detailed explanations of the fields in this worksheet, refer to the tables under Directory Server Instance Creation Choice Information.
Table 4–22 Directory Server Instance Creation Choice Configuration Worksheet
Label and State File Parameter |
Data |
---|---|
Choose to create a directory instance CREATE_INSTANCE |
Your data: _____________________________________________________ The default value is Yes. If you accept the default, you will be asked to provide the information required to create an instance. |
For detailed explanations of the fields in this worksheet, refer to the tables under Directory Server Instance Creation Information.
Table 4–23 Directory Server Instance Creation Configuration Worksheet
Label and State File Parameter |
Data |
---|---|
Instance Directory DSEE_INSTANCE_DIRECTORY |
Your data: _______________________________________________________________ The default value is: Solaris OS: /var/opt/SUNWdsee/dsinst1 Linux and HP-UX: /var/opt/sun/dsinst1 |
Directory Instance Port DSEE_INSTANCE_PORT |
Your data: _______________________________________________________________ The default value is 389. |
Directory Instance SSL Port DSEE_INSTANCE_SSL_PORT |
Your data: _______________________________________________________________ The default value is 636. |
Directory Manager DN DSEE_DN_MANAGER |
Your data: _______________________________________________________________ The default value is cn=Directory Manager. |
System User DSEE_INSTANCE_USER |
Your data: _______________________________________________________________ The default value is root. |
System Group DSEE_INSTANCE_GROUP |
Your data: _______________________________________________________________ The default value is root. |
Directory Manager Password DSEE_INSTANCE_PASSWORD |
Your data: _______________________________________________________________ The default value is the Administrator Password you provided under Common Server Settings. Minimum of 8 characters. Refer to Common Settings. |
Suffix DSEE_SUFFIX |
Your data: _______________________________________________________________ The default value is formed by the segments of the fully qualified domain name for the current host. For example, if you install on siroe.sub1.example.com, the default value is dc=sub1,dc=example,dc=com. |
For detailed explanations of the fields in this worksheet, refer to the tables under HADB Configuration Information.
Table 4–24 HADB Configuration Worksheet
Label and State File Parameter |
Data |
---|---|
HADB Management Port HADB_DEFAULT_ADMINPORT |
Your data: _______________________________________________________________ For example: 1862 |
HADB Resource Directory HADB_DEFAULT_RESDIR |
Your data: _______________________________________________________________ For example: /var/opt |
HADB Administrator Group HADB_DEFAULT_GROUP |
Your data: _______________________________________________________________ The default value is other. |
HADB Automatic Startup HADB_AUTO_START |
Your data: _______________________________________________________________ The default value is Yes. |
HADB Group Management HADB_ALLOW_GROUPMANAGE |
Your data: _______________________________________________________________ The default value is No. |
This section contains worksheets for the following topics:
For detailed explanations of the fields in this worksheet, refer to the tables under Portal Server Web Container Choice.
Table 4–25 Portal Server Web Container Choice Configuration Worksheet
Label and State File Parameter |
Data |
---|---|
Web container choice for Portal Server PS_DEPLOY_TYPE |
Your data: _______________________________________________________________ The default value is Web Server. |
For detailed explanations of the fields in this worksheet, refer to the tables under Portal Server Java ES Application Server as Web Container.
Table 4–26 Portal Server on Java ES Application Server Configuration Worksheet
Label and State File Parameter |
Data |
---|---|
Installation Directory PS_DEPLOY_DIR |
Your data: _______________________________________________________________ The default value is: Solaris OS: /opt/SUNWappserver/appserver Linux and HP-UX: /opt/sun/appserver |
Domain Name PS_DEPLOY_DOMAIN |
Your data: _______________________________________________________________ The default value is domain1. |
Server Instance Directory PS_DEPLOY_INSTANCE_DIR |
Your data: _______________________________________________________________ The default value is: Solaris OS: /var/opt/SUNWappserver/domains/domain1 Linux and HP-UX: /var/opt/sun/appserver/domains/domain1 |
Server Instance Port PS_DEPLOY_PORT |
Your data: _______________________________________________________________ The default value is 8080. |
Document Root Directory PS_DEPLOY_DOCROOT |
Your data: _______________________________________________________________ Solaris OS: /var/opt/SUNWappserver/domains/domain1/docroot Linux and HP-UX: /var/opt/sun/appserver/domains/domain1/docroot |
Administration Port PS_DEPLOY_ADMIN_PORT |
Your data: _______________________________________________________________ The default value is 4849. |
Administrator User ID PS_DEPLOY_ADMIN |
Your data: _______________________________________________________________ The default value is admin. |
Administrator Password PS_DEPLOY_ADMIN_PASSWORD |
Your data: _______________________________________________________________ The default value is from Common Server Settings. |
Secure Server Instance Protocol PS_DEPLOY_PROTOCOL |
Your data: _______________________________________________________________ The default value is http. |
Secure Administration Server Protocol PS_DEPLOY_ADMIN_PROTOCOL |
Your data: _______________________________________________________________ The default value is http. |
For detailed explanations of the fields in this worksheet, refer to the tables under Portal Server Java ES Web Server as Web Container.
Table 4–27 Portal Server on Java ES Web Server Configuration Worksheet
Label and State File Parameter |
Data |
---|---|
Installation Directory PS_DEPLOY_DIR |
Your data: _______________________________________________________________ The default value is: Solaris OS: /opt/SUNWwbsvr7 Linux and HP-UX: /opt/sun/webserver7 |
Administration Domain PS_DEPLOY_DOMAIN |
Your data: _______________________________________________________________ The default value is domain1. |
Instance Directory PS_INSTANCE_DIR |
Your data: _______________________________________________________________ The default value is: Solaris OS: /var/opt/SUNWwbsvr7-hostname.domainname Linux and HP-UX: /var/opt/sun/webserver7-hostname.domainname |
Server Instance Port PS_DEPLOY_PORT |
Your data: _______________________________________________________________ The default value is 80. |
Server Document Root PS_DEPLOY_DOCROOT |
Your data: _______________________________________________________________ The default value is: Solaris OS: /opt/SUNWwbsvr7/docs Linux and HP-UX: /opt/sun/webserver7/docs. |
Secure Server Instance Port PS_DEPLOY_PROTOCOL |
Your data: _______________________________________________________________ The default value is: http. |
Administration Host PS_DEPLOY_ADMIN_HOST |
Your data: _______________________________________________________________ Fully qualified domain name. For example, mycomputer.example.com. |
Administration Port PS_DEPLOY_ADMIN_PORT |
Your data: _______________________________________________________________ The default value is 8989 |
Secure Server Admin Protocol PS_DEPLOY_ADMIN_PROTOCOL |
Your data: _______________________________________________________________ The default value is selected (https). |
For detailed explanations of the fields in this worksheet, refer to the tables under Portal Server BEA WebLogic as Web Container.
Table 4–28 Portal Server on BEA WebLogic Server Configuration Worksheet
Label and State File Parameter |
Data |
---|---|
Installation Directory PS_DEPLOY_PRODUCT_DIR |
Your data: _______________________________________________________________ The default value is /usr/local/bea/weblogic81. |
Instance Directory PS_DEPLOY_INSTANCE_DIR |
Your data: _______________________________________________________________ The default value is /usr/local/bea/user_projects/domains. |
JDK Home Directory PS_DEPLOY_JDK_DIR |
Your data: _______________________________________________________________ The default value is /usr/local/bea/jdk142_05. |
Server / Cluster Port PS_DEPLOY_PORT |
Your data: _______________________________________________________________ The default value is 7001. |
Server / Cluster Protocol PS_DEPLOY_PROTOCOL |
Your data: _______________________________________________________________ The default value is http. |
Administrator User ID PS_DEPLOY_ADMIN |
Your data: _______________________________________________________________ The default value is weblogic. |
Administrator Password PS_DEPLOY_ADMIN_PASSWORD |
Your data: _______________________________________________________________ |
Administrator Host PS_DEPLOY_ADMIN_HOST |
Your data: _______________________________________________________________ Fully qualified domain name. For example, mycomputer.example.com. |
Administrator Port PS_DEPLOY_ADMIN_PORT |
Your data: _______________________________________________________________ The default value is 7001. |
Administrator Protocol PS_DEPLOY_ADMIN_PROTOCOL |
Your data: _______________________________________________________________ The default value is http. |
Managed Server PS_DEPLOY_NOW |
Your data: _______________________________________________________________ The default value is n. |
For detailed explanations of the fields in this worksheet, refer to the tables under Portal Server IBM WebSphere as Web Container.
Table 4–29 Portal Server on IBM WebSphere Application Server Configuration Worksheet
Label and State File Parameter |
Data |
---|---|
Installation Directory PS_DEPLOY_DIR |
Your data: _______________________________________________________________ The default value is:/opt/IBM/WebSphere/Express51/AppServer. |
Cell Name PS_DEPLOY_CELL |
Your data: _______________________________________________________________ The default value is DefaultNode. |
Node Name PS_DEPLOY_NODE |
Your data: _______________________________________________________________ The default value is DefaultNode. |
Server Instance PS_DEPLOY_INSTANCE |
Your data: _______________________________________________________________ The default value is server1. |
Server Instance Port PS_DEPLOY_PORT |
Your data: _______________________________________________________________ The default value is 9080. |
Server Instance Protocol PS_DEPLOY_PROTOCOL |
Your data: _______________________________________________________________ The default value is http. |
Document Root Directory PS_DEPLOY_DOCROOT |
Your data: _______________________________________________________________ The default value is /opt/IBM/WebSphere/Express51/AppServer/installedApps\ DefaultNode/DefaultApplication.ear. |
JDK Home Directory PS_DEPLOY_JDK_DIR |
Your data: _______________________________________________________________ The default value is /opt/IBM/WebsSphere/Express51/Appserver/java. |
Administrator User ID PS_DEPLOY_ADMIN |
Your data: _______________________________________________________________ The default value is weblogic. |
Administrator Password PS_DEPLOY_ADMIN_PASSWORD |
Password of the WebSphere administrator (system user). |
Administrator Host PS_DEPLOY_ADMIN_HOST |
Administrator server host name. Fully qualified domain name. For example, mycomputer.example.com. |
Administrator Port PS_DEPLOY_ADMIN_PORT |
The default value is 7090. |
Administrator Protocol PS_DEPLOY_ADMIN_PROTOCOL |
Specify whether the Administrator Port is a secure port. A secure port uses the HTTPS protocol. A non-secure port uses HTTP. The default value is http. |
For detailed explanations of the fields in this worksheet, refer to the tables under Portal Server Web Container Deployment Information.
Table 4–30 Portal Server on Web Container Configuration Worksheet
Label and State File Parameter |
Data |
---|---|
Portal Access PS_PORTALACCESS_URL |
Your data: _______________________________________________________________ |
Portal ID PS_PORTAL_ID |
Your data: _______________________________________________________________ The default value is portal1. |
Search ID PS_SEARCH_ID |
Your data: _______________________________________________________________ The default value is search1. |
Deployment URI PS_DEPLOY_URI |
Your data: _______________________________________________________________ The default value is /portal. |
Portal Instance ID PS_INSTANCE_ID |
Your data: _______________________________________________________________ |
Enable Secure Remote Access SRA_SWITCH_CORE |
Your data: _______________________________________________________________ The default value is Disabled. |
Developer Sample PS_DEVELOPER_PORTAL |
Your data: _______________________________________________________________ The default value is selected. |
Enterprise Sample PS_ENTERPRISE_PORTAL |
Your data: _______________________________________________________________ The default value is selected. |
Community Sample PS_COMMUNITY_PORTAL |
Your data: _______________________________________________________________ The default value is selected. |
This section contains worksheets for the following topics:
For detailed explanations of the fields in this worksheet, refer to the tables under Portal Server Secure Remote Access Gateway Access.
Table 4–31 Portal Server Secure Remote Access Gateway Access Configuration Worksheet
Label and State File Parameter |
Data |
---|---|
Host Name SRA_SERVER_HOST |
Your data: _______________________________________________________________ The default value is the name of the local host. |
Subdomain SRA_SERVER_DOMAIN |
Your data: _______________________________________________________________ The default value is the domain name of the host. |
Domain SRA_GATEWAY_DOMAIN |
Your data: _______________________________________________________________ The default value is the default domain of the host. |
Access Port SRA_GATEWAY_PORT |
Your data: _______________________________________________________________ The default value is 443. |
Gateway Profile Name SRA_GATEWAY_PROFILE |
Your data: _______________________________________________________________ The default value is default. |
Log User Password SRA_LOG_USER_PASSWORD |
Your data: _______________________________________________________________ |
For detailed explanations of the fields in this worksheet, refer to the tables under Portal Server Secure Remote Access Gateway Configuration.
Table 4–32 Portal Server Secure Remote Access Gateway Configuration Worksheet
Label and State File Parameter |
Data |
---|---|
Protocol SRA_GW_PROTOCOL |
Your data: _______________________________________________________________ The default value is https. |
Host Name SRA_GW_HOSTNAME |
Your data: _______________________________________________________________ The default value is the name of the local host. |
Subdomain SRA_GW_SUBDOMAIN |
Your data: _______________________________________________________________ There is no default value. |
Domain SRA_GW_DOMAIN |
Your data: _______________________________________________________________ The default value is the domain of the local host. |
Host IP Address SRA_GW_IPADDRESS |
Your data: _______________________________________________________________ The default value is IP address of the local host. |
Access Port SRA_GW_PORT |
Your data: _______________________________________________________________ The default value is 443. |
Gateway Profile Name SRA_GW_PROFILE |
Your data: _______________________________________________________________ The default value is default. |
For detailed explanations of the fields in this worksheet, refer to the tables under Portal Server Secure Remote Access Netlet Proxy Configuration.
Table 4–33 Portal Server Secure Remote Access Netlet Proxy Configuration Worksheet
Label and State File Parameter |
Data |
---|---|
Host Name SRA_NLP_HOSTNAME |
Your data: _____________________________________________________ The default value is the name of the local host. |
Subdomain SRA_NLP_SUBDOMAIN |
Your data: _____________________________________________________ There is no default value. |
Domain SRA_NLP_DOMAIN |
Your data: _____________________________________________________ The default value is the domain of the local host. |
Host IP Address SRA_NLP_IPADDRESS |
Your data: _____________________________________________________ The default value is the IP address of the local host. |
Access Port SRA_NLP_PORT |
Your data: _____________________________________________________ The default value is 10555. |
Gateway Profile Name SRA_NLP_GATEWAY_PROFILE |
Your data: _____________________________________________________ The default value is default. |
For detailed explanations of the fields in this worksheet, refer to the tables under Portal Server Secure Remote Access Rewriter Proxy Configuration.
Table 4–34 Portal Server Secure Remote Access Rewriter Proxy Configuration Worksheet
Label and State File Parameter |
Data |
---|---|
Host Name SRA_RWP_HOSTNAME |
Your data: _______________________________________________________________ The default value is the name of the local host. |
Subdomain SRA_RWP_SUBDOMAIN |
Your data: _______________________________________________________________ There is no default value. |
Domain SRA_RWP_DOMAIN |
Your data: _______________________________________________________________ The default value is the domain name of the local host. |
Host IP Address SRA_RWP_IPADDRESS |
Your data: _______________________________________________________________ The default value is the IP address of the local host. |
Access Port SRA_RWP_PORT |
Your data: _______________________________________________________________ The default value is 10443. |
Gateway Profile Name SRA_RWP_GATEWAY_PROFILE |
Your data: _______________________________________________________________ The default value is default. |
For detailed explanations of the fields in this worksheet, refer to the tables under Portal Server Secure Remote Access Certificate Information.
Table 4–35 Portal Server Secure Remote Access Certificate Configuration Worksheet
Label and State File Parameter |
Data |
---|---|
Organization SRA_CERT_ORGANIZATION |
Your data: _______________________________________________________________ |
Division SRA_CERT_DIVISION |
Your data: _______________________________________________________________ |
City/Locality SRA_CERT_CITY |
Your data: _______________________________________________________________ |
State/Province SRA_CERT_STATE |
Your data: _______________________________________________________________ |
Country Code SRA_CERT_COUNTRY |
Your data: _______________________________________________________________ Two-letter country code. |
Certificate Database Password SRA_CERT_PASSWORD |
Your data: _______________________________________________________________ Password (and confirmation) that applies only to self-signed certificates. |
For detailed explanations of the fields in this worksheet, refer to the tables under Web Proxy Server Configuration Information.
Table 4–36 Web Proxy Server Administration Configuration Worksheet
Label and State File Parameter |
Data |
---|---|
Administrator User ID WPS_ADMIN_USER |
Your data: _______________________________________________________________ For example: admin (default from Common Server Settings) |
Administrator Password WPS_ADMIN_PASSWORD |
Your data: _______________________________________________________________ Default from Common Server Settings. |
Proxy Server Domain Name WPS_PROXY_DOMAIN |
Your data: _______________________________________________________________ |
Administration Port WPS_ADMIN_PORT |
Your data: _______________________________________________________________ The default value is: 8888. |
Administration Server Runtime User ID WPS_ADMIN_RUNTIME_USER |
Your data: _______________________________________________________________ The default value is: root. |
Instance Runtime UNIX User ID WPS_INSTANCE_RUNTIME_USER |
Your data: _______________________________________________________________ The default value is: nobody |
Proxy Instance Port WPS_INSTANCE_PORT |
Your data: _______________________________________________________________ The default value is: 8080. |
Instance Auto Start Value WPS_INSTANCE_AUTO_START |
Your data: _______________________________________________________________ The default value is N. |
This section contains worksheets for the following topics:
For detailed explanations of the fields in this worksheet, refer to the tables under, Web Server Choice of Configuration Type .
Table 4–37 Web Server Configuration Type Configuration Worksheet
Label and State File Parameter |
Data |
---|---|
Configure Admin Instance as Server WS_ADMIN_IS_SERVER_MODE |
Your data: _______________________________________________________________ The default value is unselected. |
Configure Admin Instance as Node WS_ADMIN_IS_NODE_MODE |
Your data: _______________________________________________________________ The default value is selected. |
Automatically start server when system starts WS_START_ON_BOOT |
Your data: _______________________________________________________________ The default value is F. |
For detailed explanations of the fields in this worksheet, refer to the tables under Web Server Administration Server Settings.
Table 4–38 Web Server Administration Server Settings Configuration Worksheet
Label and State File Parameter |
Data |
---|---|
Administrator Server User ID WS_ADMIN_SERVER_USER |
Your data: _______________________________________________________________ The default value is root or the value you provided under Common Server Settings. Note: If you chose to use a single administrator account, this field is not present. |
Administrator User ID WS_LOGIN_USER |
Your data: _______________________________________________________________ The default value is admin or the value you provided under Common Server Settings. Note: If you chose to use a single administrator account, this field is not present. |
Administrator Password WS_LOGIN_PASSWORD |
Your data: _______________________________________________________________ The default value is the value you provided under Common Server Settings. Note: If you chose to use a single administrator account, this field is not present. |
Server Host WS_ADMIN_HOST |
Your data: _______________________________________________________________ The value has the format hostname.domainname. |
SSL Port WS_ADMIN_SSL_PORT |
Your data: _______________________________________________________________ The default value is 8989. |
HTTP Port WS_ADMIN_HTTP_PORT |
Your data: _______________________________________________________________ The default value is 8800. |
For detailed explanations of the fields in this worksheet, refer to the tables under Web Server Administration Node Settings.
Table 4–39 Web Server Administration Node Settings Configuration Worksheet
Label and State File Parameter |
Data |
---|---|
Node Host WS_NODE_HOST |
Your data: _______________________________________________________________ Fully qualified name of host. For example, mycomputer.example.com. |
SSL Port WS_NODE_SSL_PORT |
Your data: _______________________________________________________________ The default value is 8989. |
Runtime User ID WS_INSTANCE_USER |
Your data: _______________________________________________________________ The default value is root. |
Register Node with Remote Administration Server WS_REGISTER_NODE |
Your data: _______________________________________________________________ The default value is selected. |
Remote Server Host WS_ADMIN_HOST |
Your data: _______________________________________________________________ Fully qualified domain name of the remote host on which the Administration Server is installed. |
Remote Server SSL Port WS_ADMIN_SSL_PORT |
Your data: _______________________________________________________________ The default value is 8989. |
Remote Server User Name WS_ADMIN_LOGIN_USER |
Your data: _______________________________________________________________ Administrator user name used to log in to the remote Administration Server. |
Remote Server Password WS_ADMIN_LOGIN_PASSWORD |
Your data: _______________________________________________________________ Password used to log in to the remote Administration Server. |
For detailed explanations of the fields in this worksheet, refer to the tables under Web Server Instance Settings.
Table 4–40 Web Server Instance Settings Configuration Worksheet
Label and State File Parameter |
Data |
---|---|
Server Name WS_SERVER_NAME |
Your data: _______________________________________________________________ The default value is:webservd. |
HTTP Port WS_HTTP_PORT |
Your data: _______________________________________________________________ The default value is: 80. |
Runtime UNIX User ID WS_SERVER_USER |
Your data: _______________________________________________________________ The default value is: webservd. |
Document Root Directory WS_DOCROOT |
Your data: _______________________________________________________________ The default value is: Solaris OS: /var/opt/SUNWwbsvr7/https:-hostname.domain/docs Linux and HP-UX: /var/opt/sun/webserver7/https:-hostname.domain/docs |
For detailed explanations of the fields in this worksheet, refer to the tables underParameters Used Only in State Files.
Table 4–41 Parameters Used in State Files Configuration Worksheet
Label and State File Parameter |
Data |
---|---|
CCCP_UPGRADE_EXTERNAL_ \ INCOMPATIBLE_JDK |
Your data: ________________________________________________________ The parameter is case sensitive. The default value is no. |
CONFIG_TYPE |
Your data: ________________________________________________________ The default value is Custom, called Configure Now. |
DeploymentServer |
Your data: ________________________________________________________ The default value is AppServer. |
PSDEPLOYTYPE |
Your data: ________________________________________________________ Permitted values are IWS, SUNONE8, WEBLOGIC, WEBSPHERE. |
LOCALE |
Your data: ________________________________________________________ Permitted value is False. |
LICENSE_TYPE |
Your data: ________________________________________________________ The permitted values are Evaluation and Deployment, but this field is not used. |
PSP_EXIT_ON_DEPENDENCY_WARNING |
Your data: ________________________________________________________ Permitted values is No. |
PSP_LOG_CURRENTLY_INSTALLED |
Your data: ________________________________________________________ Permitted value is Yes. |
PSP_SELECTED_COMPONENTS |
Your data: ________________________________________________________ Permitted value ALL. |