Preface |
These Product Notes contain important and late-breaking information about XCP 1041 and the Sun SPARC® Enterprise M4000/M5000 servers hardware, software, and documentation that became known after the documentation set was published.
If you have technical questions or issues that are not addressed in the Sun SPARC Enterprise M4000/M5000 servers documentation, contact your local Sun Service representative.
For customers in the U.S. or Canada, call 1-800-USA-4SUN (1-800-872-4786). For customers in the rest of the world, find the World Wide Solution Center nearest you by visiting the following web site:
http://www.sun.com/service/contacting/solution.html/
The Solaris Operating System and Sun Java Enterprise System software are preinstalled on your Sun SPARC Enterprise M4000/M5000 servers.
The mandatory Solaris patches for the SPARC Enterprise M4000/M5000 servers should be preinstalled on your system. See Solaris Patch Information for the list of patches.
Note - Each patch ID listed includes a revision level, shown as a two-digit suffix. Check SunSolve.Sun.COM for the latest patch revision. |
The Sun Connection Update Manager can be used to reinstall the patches if necessary or to update the system with the latest set of mandatory patches.
Information about the Sun Connection Update Manager is available in the Sun Update Connection System 1.0.8 Administration Guide which is located at the following web site:
http://docs.sun.com/app/docs/doc/819-4687
Complete the following steps to register your system and use the Sun Connection Update Manager to obtain the latest Solaris OS patches.
Installation information and README files are included in the patch download.
Note - Patches 123003-03 and 124171-06 must be installed on your system prior to using Sun Connection Update Manager. These patches can be downloaded from http://sunsolve.sun.com/ if needed. |
Two options are available for obtaining the patches:
1. Copy the file /usr/lib/breg/data/RegistrationProfile.properties to the /tmp directory.
2. Edit the file /tmp/RegistrationProfile.properties to add your user name, password, and if necessary, a network proxy.
3. Register your system by entering the command:
4. Obtain the correct patches for your system by entering the command:
5. Install the patch, as follows.
This patch can be downloaded through the Sun Connection Update Manager.
a. Download the patch to your /var/sadm/spool directory by entering:
c. To install the patch, follow the special installation instructions in the file /var/sadm/spool/xxxxxx-xx/README.xxxxxx-xx.
6. After installing the patch, you might be required to restart the system.
Note - The reboot command does not complete installations of patches that require a restart. Use either the init command or the shutdown command instead. |
7. Display a list of patches to be installed by entering the command:
8. Download and install the patches by entering the command:
9. If any of the patches requires a system restart, see Step 6.
The patch installation is now complete.
1. Copy the file /usr/lib/breg/data/RegistrationProfile.properties to the /tmp directory.
2. Edit the file /tmp/RegistrationProfile.properties to add your user name, password, and if necessary, a network proxy.
3. Register your system by entering the command:
5. In the Available tab in the Update Manager, open the dropdown menu and select Sun SPARC(R) Enterprise M4000/M5000/M8000/M9000 Servers from the Update Collection.
Update Manager will analyze your system for any patches that are needed.
6. If patch xxxxxx-xx is recommended, select it by clicking the box to the left of the patch ID, then click the Install button.
The patch will be downloaded to /var/sadm/spool.
8. Follow the installation instructions in the file
/var/sadm/spool/xxxxxx-xx/README.xxxxxx-xx.
9. After installing xxxxxx-xx, you might be required to restart the system.
Follow the instructions in Update Manager for restarting, or use the shutdown or init commands:
Note - The reboot command does not complete installations of patches that require a restart. Use either the Update Manager, the init command, or the shutdown command instead. |
10. Launch the Update Manager again, and select the Enterprise Server collection.
11. If the Update Manager does not automatically start a new analysis, click the Check for Updates button.
12. Select any patches that are listed by checking the boxes to the left of the patch IDs.
Update Manager will download and install the patches.
14. If any of the patches requires a system restart, see Step 9.
The patch installation is now complete.
For additional information, read the release notes which come with your Solaris documentation, as well as the latest Solaris 10 Sun Hardware Platform Guide. Also, check the documentation web page for any additional supplements to this book. The most up-to-date information is posted at:
http://www.sun.com/documentation/
Instructions for installing, administering, and using your servers are provided in the Sun SPARC Enterprise M4000/M5000 servers documentation set. The entire documentation set is available for download from the following web site:
http://www.sun.com/documentation/
Note - Information in these product notes supersedes the information in the Sun SPARC Enterprise M4000/M5000 servers documentation set. |
Solaris Operating System (Solaris OS) documentation is located at:
http://www.sun.com/documentation/
Sun is interested in improving its documentation and welcomes your comments and suggestions. You can submit your comments by going to:
http://www.sun.com/hwdocs/feedback/
Please include the title and part number of your document with your feedback:
Sun SPARC Enterprise M4000/M5000 Servers Product Notes for XCP Version 1041, part number 820-2221-13
Copyright © 2007, Sun Microsystems, Inc. All Rights Reserved.