test

SunVTS 3.0 User's Guide

The vtsprobe Utility

Use the vtsprobe utility to display the results of the SunVTS kernel hardware device probe. vtsprobe lists all of the test machine's devices, their configuration information, and their corresponding hardware tests.

Note -

The SunVTS kernel must be running on the test machine for the vtsprobe command to work. See "Starting the SunVTS Kernel and Interface Separately" for instructions on how to start the SunVTS kernel.

To Display the Devices for a Local System
Note -

The SunVTS kernel (vtsk) must be running on the system.

  1. Type the following command: 

    # /opt/SUNWvts/bin/vtsprobe

    Example 3-1 vtsprobe Example

    example% vtsprobe

Processor(s)
	fpu(fputest)
		Architecture: sparc
		Type: TI TMS390Z50 SuperSPARC chip
	system(systest)
		System Configuration: sun4m SPARCstation 10 (1 X 390Z50)
		System clock frequency: 40 MHz
		SBUS clock frequency: 20 MHz
Memory
	kmem(vmem)
		Amount: 233580KB
	mem(pmem)
		Physical Memory size:48 Mb
Network
	isdn0(isdntest)
	le0(nettest)
		Host_Name: example
		Host Address: 131.155.56.122
		Host ID: 12347f61
		Domain Name: widget.com
SCSI-Devices(esp0)
	c0t0d0(rawtest)
		Logical Name: c0t0d0
		Capacity: 510.23MB
		Controller: esp0
	c0t0d0(fstest)
		Logical Name: c0t0d0
		Controller:esp0
	tape0(tapetest)
		Drive Type: Exabyte EXB-8200 8mm Helical Scan
Comm.Ports
	zs0(sptest)
		term/a & term/b
Graphics
	cgsix0(cg6)
		5000KB required for testing.
OtherDevices
		Controller:Intel 82077
	diskette(fstest)
		Logical Name: diskette
		Controller: Intel 82077
	sound0(audio)
		Audio Device Type: DBRI Speakerbox
To Display Devices of a Remote System
Note -

The SunVTS kernel (vtsk) must be running on the remote system.

  1. Type vtsprobe -h hostname, where hostname is the host name of the remote machine.

    The vtsprobe utility connects to the remote machine and displays the remote machine's hardware devices.

The output is displayed on the window in which you invoke vtsprobe.