C H A P T E R 11 |
Sun Fire ![]() |
dpmtest exercises and verifies the Fibre-Channel mass storage subsystem in Sun Fire V880 platforms. dpmtest exercises various tests in the Fibre-Channel Backplane firmware for validating the mass storage system.
No special hardware is required to run the dpmtest test.
To reach the following dialog box, right-click on the test name in the System Map and select Test Parameter Options. If you do not see this test in the System Map, you might need to expand the collapsed groups, or your system might not include the device appropriate to this test. Refer to the SunVTS User's Guide for more details.
FIGURE 11-1 dpmtestTest Parameter Options Dialog Box
/opt/SUNWvts/bin/dpmtest standard_arguments -0 dev=[device name],
dpmdev=[device1+device2+...], fwtest=[Enable|Disable], lb=[Enable|Disable]
Copyright © 2007, Sun Microsystems, Inc. All Rights Reserved.