Microsoft Windows Profile コンポーネントには、Windows OS の構成および Windows リモートエージェント用の変数が含まれています。
このリストで説明されている変数によって、Windows OS 用のすべてのインストールおよび構成パラメータが提供されます。リストには、ターゲット設定可能なコンポーネントの値を使用するいくつかの変数があります。Windows Profile 変数の目的では、ターゲット設定可能なコンポーネントはターゲットホストです。
説明 : Windows RIS イメージサーバーの名前。
例 : risserver-windows
説明 : ターゲットホスト名。
デフォルト値 : :[targetableComponent:installPath]
説明 : 電源オフ、再起動、および電源オン機能を自動化する OSP Control Service を呼び出すかどうか (True、False)。
ターゲットホストに Windows OS をプロビジョニングするには、この変数の値が True である必要があります。
説明 : コンポーネントの説明。
例 : Windows 2003 Profile
説明 : このプロファイルでインストールする Windows バージョン (2000、2003)。
デフォルト: 2003
説明 : このプロファイルでインストールするシステムのプロセッサアーキテクチャー (x86、x64)。
デフォルト: x86
説明 : 配備するこのプロファイルの最小ディスクサイズ。
デフォルト: 10GB
説明 : Windows ブートサーバーの名前。
例 : biwindows1
説明 : ブートサーバーによりサービスが提供されるサブネット。
例 : 192.168.5.0
説明 : このサブネット上のブートサーバーの IP アドレス。
例 : 192.168.5.0
説明 : このサブネットの Windows Active Directory ドメイン。
例 : winprov.n1lab.sun.com
説明 : ブートサーバー上の Windows 製品のディレクトリ名。
例 : D:\RemoteInstall\Setup\English\Images\Win2003
説明 : Software Information File (SIF) の位置。
例 : D:\RemoteInstall\Setup\English\Images\Win2003\i386\templates\ristndrd.sif
説明 : Active Directory ユーザー ID。
例 : n1ospadmin
説明 : ブートサーバーへのアクセスに使用するプロトコル (RSH か SSH)。
カスタム Windows プロファイルでは、RSH プロトコルはサポートされません。カスタム Windows プロファイルでは、通信プロトコルとして SSH を使用する必要があります。
例 : ssh
説明 : ブートサーバーへのアクセスに使用するユーザー ID。
例 : n1opspssh
説明 : ブートサーバーへのアクセスに使用するパスワード。この変数の値として、暗号化されたパスワードを入力します。パスワードを暗号化する方法の詳細については、「パスワードの暗号化」を参照してください。
例 : Clkjgfw==
説明 : RemInst share 内の一時 Software Information File (sif) の位置。
例 : D:\RemoteInstall\N1ospsif
説明 : CIW および OS Chooser ファイルの位置。
例 : D:\RemoteInstall\OSChooser\English
説明 : OS プロビジョニングプラグインスクリプトの位置。
例 : C:\N1ospRisUtil\N1ospScripts
説明 : ターゲットホストのホスト名。
例 : mysystem
説明 : ターゲットホストのユーザーのフルネーム。
例 : Default user
説明 : ターゲットホストが所属する組織の名前。
例 : Default organization
説明 : インストールする Windows OS の製品キー。製品キーは OS のソフトウェアディストリビューションに記載されており、xxxxx-xxxxx-xxxxx-xxxxx-xxxxx の形式です。
説明 : ターゲットホストの最初のドライブのすべてのパーティションを、NTFS ファイルシステムで再フォーマットするかどうかを指定します。
デフォルト: Yes
説明 : ターゲットホストの管理者のテキスト形式のパスワードをクリアします。
デフォルト: default123
説明 : ターゲットホストのタイムゾーン。
デフォルト値 : %TIMEZONE%
説明 : ターゲットホストにインストールする言語。詳細は、Microsoft Web サイトにある「Supported Unattended RIS Variables」を参照してください。
例 : 0409
説明 : システムにインストールする言語グループ。
例 : 1
説明 : Windows OS ライセンスが接続クライアント数または同時使用ユーザー数のどちらのライセンス方式であるかを指定します。
例 : PerSeat
説明 : サーバー用に購入されたクライアントライセンス数を指定します。ClientAccessLicense_automode_setting に PerServer を設定した場合は、この変数の値を設定する必要があります。
例 : 100
説明 : このサブネット上の DNS サーバーの IP アドレス。
例 : 192.168.5.167
説明 : ターゲットホストのドメイン名
この値を指定した場合は、workgroup_name 変数の値を指定しないでください。
例 : n1lab.west.example.com
説明 : ドメイン管理者のユーザーアカウントの名前。
例 : domadmin
説明 : ドメイン管理者のユーザーアカウントのパスワード。
例 : domadmin567
説明 : ターゲットホストが所属しているワークグループの名前。
この値を指定した場合は、domain_name、domain_administrator_name、および domain_administrator_password 変数の値を指定しないでください。
例 : n1labs
説明 : ターゲットホストに端末サーバーをインストールするかどうかを指定します。端末サーバーをインストールする場合は On、端末サーバーをインストールしない場合は Off に設定します。
例 : On
説明 : 端末サーバー経由でのこのターゲットホストへの遠隔接続を許可するかどうかを指定します。
例 : 1
説明 : 端末サービスによるクライアントアクセスライセンスの管理方法を指定します。有効な値は PerDevice か PerUser です。
例 : PerDevice
説明 : 端末サーバーユーザーのアクセス権を指定します。この変数に 0 を設定すると、Windows 2000、Windows XP、および Windows 2003 のユーザーと同じアクセス権が端末サーバーユーザーに 割り当てられます。この変数を 1 に設定すると、端末サーバー 4.0 のユーザーと同じアクセス権が割り当てられます。
例 : 0
説明 : distribution share 下の Plug & Play ドライバの位置。複数のパスを含めるには、セミコロン (;) で区切ります。
例 : Drivers\Nic;Drivers\Lsi
説明 : Setup Loader で使用する OEM の SCSI ドライバを指定します。
例 : LSI Logic PCI SCSI/FC MPI Driver (Server 2003 32-bit) = OEM
説明 : Setup Loader で使用する追加の OEM または市販の SCSI ドライバを指定します。n には、2 〜 5 の範囲の番号を指定します。最大 5 まで、ドライバを 1 つ追加するたびに n の値を 1 大きくします (例: mass_storage_drivers_entry2 )。
説明 : Setup Loader で使用する市販の SCSI ドライバを指定します。
市販のドライバは、mass_storage_drivers_entry_ 設定の最後に指定します。
例 : IDE CD-ROM (ATAPI 1.2)/PCI IDE Controller = RETAIL
説明 : $OEM$\Textmode フォルダに存在する、外部記憶装置の SCSI ドライバファイルを指定します。番号 1 から始めて 10 まで、ドライバファイルを 1 つ追加するたびに n の値を 1 ずつ大きくします (例: oem_boot_file1)。
例 : lsi_sas.sys
説明 : GUI モードのセットアップの完了後に実行する個別のコマンドを指定します。番号 1 から始めて 10 まで、コマンドを 1 つ追加するたびに n の値を 1 ずつ大きくします (例: gui_run_once_cmd1)。
例 : dcpromo /answer:%SYSTEMDRIVE%\N1OSP\dc_answerfile
cmd5 まで
説明 : HTML 形式のヘルプの URL を指定します。
例 : http://n1labs.west.example.com/help.html
説明 : ブラウザのホームページの URL を指定します。
例 : http://www.example.com