Exit Print View | |
Oracle Integrated Lights Out Manager (ILOM) 3.0 Supplement for Sun Blade T6320 Server Modules |
Documentation, Support, and Training
Understanding ILOM for the Sun Blade T6320 Server Module
Chassis Monitoring Module Features
Resetting the Password to the Factory Default
Viewing and Configuring Host Control Information
Managing Host Diagnostics and POST
Managing System User Interactions
Managing the Service Processor
Changing Service Processor Setting to Factory Defaults
Reset Service Processor Setting to Factory Default Values (CLI)
Reset Service Processor Setting to Factory Default Values (Web Interface)
Changing Configuration Policy Settings
Managing Power Usage and Monitoring Power Consumption
Monitoring Active System Faults
Managing Virtual Keyswitch Settings
Sensors on the Sun Blade T6320 Server Module Server
Indicators on the Sun Blade T6320 Server Module
Limits to Backward Compatibility
Create an ALOM CMT Compatibility Shell
Switch Between the ALOM CMT Shell and the Host Console
Return to the ILOM From the ILOM CMT Shell
ILOM and ALOM CMT Command Comparison
Event Messages Available Through the ALOM Compatibility Shell
Service Processor Usage Event Messages
Environmental Monitoring Event Messages
Use the /SP/console escapechars property to change the escape character sequence to switch from a system console session back to ILOM.
At the -> prompt, type:
-> set /SP/console escapechars=xx
where xx can be any printable characters.
The sequence is limited to two characters. The default value is #. (Hash-Period). You can customize the sequence.
Note - Changing the escape character does not take effect in a currently active console session.