Front Panel System Status LEDs

The Sun Fire X2270 M2 Server has three system status LEDs on both the front and rear panels of the server. The LEDs are the Power LED, the Service Action Required LED, and the Locate LED.

image:An illustration showing the front panel LEDs and the HD LEDs.

	LED Name	Color	Activity
1	Server Locate LED	White	Use to identify a server in a rack. Activate locally by pressing the Locate button or activate remotely using the ILOM. Off: Normal On: Blinking
2	Server Service Action Required LED	Amber	The SP monitors the health of the system and activates the Service Action Required LED. Off: Normal operation Slow blink: A new (unacknowledged) event that requires a service action has been detected. Steady on: An event has been acknowledged, but the problem still requires attention. The following conditions cause the SP to activate the Service Action Required LED: Voltage outside thresholds. Temperature above thresholds. Fan speed below thresholds (or not present). 24 correctable errors have occurred in a 24 hour period. One correctable error has occurred.
3	Power OK LED	Green	Use to discern the power state of the server. Steady On: Full-power mode on and OK. Blinking: Standby power is on, but main power is off Quick blink: in POST, diagnostics running Off: No power. AC cords not attached. For more on power modes, see Power Modes.
4	Power Button

Skip Navigation Links
Exit Print View
	Sun Fire X2270 M2 Server Service Manual