About This Documentation (PDF and HTML)
Download Server System Tools and Drivers
Hardware Installation and Product Notes
Sun Fire X2270 M2 Server Installation Guide
Installation Overview and Preparation
Installing the Server Into a Rack With Optional Slide Rails
Communicating With the ILOM and the System Console
Configuring the Factory--Installed Oracle Solaris 10 Operating System
Powering On and Powering Off the Server
Sun Fire X2270 M2 Server Product Notes
Oracle Solaris Operating System
Planning the Oracle Solaris Operating System Installation
Installing Oracle Solaris 10 OS
Introduction to Linux Installation
Preliminary Tasks Before Installing an OS
Installing Oracle Enterprise Linux
Installing SUSE Linux Enterprise Server
Installing Red Hat Enterprise Linux
Booting From OS Distribution Media
Configuring a Linux Server to Support PXE Installation
Identifying Logical and Physical Network Interface Names for Linux OS Configuration
Planning the Operating System Installation
Installing Windows Server 2008 Operating System
Incorporating Sun Fire Drivers Into a WIM Image
Configuring RAID Controller in the BIOS Setup Utility
Sun Fire X2270 M2 Server Installation Guide for ESX Software
Preparing to Install VMware ESX 4.0 and ESXi 4.0
Administration, Diagnostics, and Service
Overview of the ILOM Supplement
Communicating With the ILOM and the System Console
ILOM Platform Features for the Sun Fire X2270 M2 Server
Using ILOM to Monitor the Host
Introduction to Diagnostic Tools
U-Boot Diagnostic Startup Tests
Accessing the Pc-Check Diagnostics Utility on the Tools and Drivers CD/DVD
Sun Fire X2270 M2 Server Service Manual Organization
Sun Fire X2270 M2 Server Overview
Maintaining the Sun Fire X2270 M2 Server
Sun Fire X2270 M2 Server Service Procedures and Information
How to Get the SP IP Address Using a Serial Connection and the CLI
Installing Critical Oracle Solaris Patches
About Pc-Check
Accessing Pc-Check Diagnostics Utility
Accessing the Pc-Check Diagnostics Utility on the Tools and Drivers CD/DVD
Advanced Diagnostics Tests
Immediate Burn-In Testing
Component Tests
Create Diagnostic Partition
Deferred Burn-In Testing
Pc-Check
Exit to DOS
Pc-Check Diagnostics Overview
Print Results Report
Show Results Summary
How to Run Immediate Burn-in Tests
Troubleshooting Scenarios
System Information Menu
How to Test the Server’s Hard Disks
How to Install a PCIe Card
Locations of Internal Server Components
How to Remove a PCIe Card
How to Install the PCIe Riser
How to Remove the PCIe Riser
Components List
Physical Specifications
DIMM Population Rules
How to Install Portmap on Your DHCP Server
Server Back Panel LEDs and Ports
BIOS POST F1 and F2 Errors
BIOS POST Memory Testing Sequence
Post Oracle Solaris Installation Configuration
How to Power Off the Server
How to Power On the Server
Power Modes
Default BIOS Power-On Self Test (POST) Events
Power Specifications
How to Install the Power Supply
Locations of Internal Server Components
How to Remove the Power Supply
Components List
Preinstalled Oracle Solaris 10 OS Image
Preparing to Install VMware ESX 4.0 and ESXi 4.0
Preparing for Service and Operation
PXE Installation
How to Install Windows Server 2008 Using PXE Network
How to Install Windows Server 2008 Using PXE Network
How to Install and Configure the neopxe Boot Server Daemon
How to Configure the NFS Service on Your PXE Server
How to Configure the TFTP Service on Your DHCP Server
How to Install and Configure a DHCP Server
How to Disable the Firewall for Red Hat Linux
How to Install Portmap on Your DHCP Server
How to Install and Configure the neopxe Boot Server Daemon
How to Configure the NFS Service on Your PXE Server
How to Configure the TFTP Service on Your DHCP Server
How to Install and Configure a DHCP Server
How to Disable the Firewall for Red Hat Linux
How to Install Portmap on Your DHCP Server
How to Install SLES10 or SLES11 Using Network PXE Boot
Selecting a Boot Media and OS Delivery Option
Installing SLES10 or SLES 11 Using a PXE Network Environment
Configuring a Linux Server to Support PXE Installation