| Skip Navigation Links | |
| Exit Print View | |
|
Sun Fire X2270 M2 Server Product Documentation |
About This Documentation (PDF and HTML)
Download Server System Tools and Drivers
Hardware Installation and Product Notes
Sun Fire X2270 M2 Server Installation Guide
Installation Overview and Preparation
Installing the Server Into a Rack With Optional Slide Rails
Communicating With the ILOM and the System Console
Configuring the Factory--Installed Oracle Solaris 10 Operating System
Powering On and Powering Off the Server
Sun Fire X2270 M2 Server Product Notes
Oracle Solaris Operating System
Planning the Oracle Solaris Operating System Installation
Installing Oracle Solaris 10 OS
Introduction to Linux Installation
Preliminary Tasks Before Installing an OS
Installing Oracle Enterprise Linux
Installing SUSE Linux Enterprise Server
Installing Red Hat Enterprise Linux
Booting From OS Distribution Media
Configuring a Linux Server to Support PXE Installation
Identifying Logical and Physical Network Interface Names for Linux OS Configuration
Planning the Operating System Installation
Installing Windows Server 2008 Operating System
Incorporating Sun Fire Drivers Into a WIM Image
Configuring RAID Controller in the BIOS Setup Utility
Sun Fire X2270 M2 Server Installation Guide for ESX Software
Preparing to Install VMware ESX 4.0 and ESXi 4.0
Administration, Diagnostics, and Service
Overview of the ILOM Supplement
Communicating With the ILOM and the System Console
ILOM Platform Features for the Sun Fire X2270 M2 Server
Using ILOM to Monitor the Host
About This Documentation (PDF and HTML)
Introduction to Diagnostic Tools
Standalone Package-Based Diagnostics
Offline Operating System-Based Diagnostics
Online Operating System-Based Diagnostics
Diagnostic Tools for Oracle Servers
Using the Diagnostic Tools to Troubleshoot a Server
Setting Up a Server for Testing
U-Boot Diagnostic Startup Tests
U-Boot Diagnostic Startup Tests Overview
System Diagnostic Test Options at Startup
U-Boot Diagnostic Test Modes-Normal, Quick, and Extended
Reporting Diagnostic Failures at System Startup
Running the U-Boot Diagnostic Tests
How to Select a U-Boot Diagnostic Mode to Run at Startup
U-Boot Normal Mode- Test Output Sample
U-Boot Quick Mode- Test Output Sample
U-Boot Extended Mode- Test Output Sample
Sample SP Environmental Variables Showing U-Boot Test Status
Accessing Pc-Check Diagnostics Utility
How to Access Pc-Check Through the ILOM Web Interface
How to Access Pc-Check Through the ILOM CLI
System Information Menu Options
Advanced Diagnostics Tests Menu Options
How to Test the Server's Hard Disks
How to Run Immediate Burn-in Tests
How to Create and Save Scripts for Deferred Burn-in Testing
Create Diagnostic Partition Menu Option
Show Results Summary Menu Options
Accessing the Pc-Check Diagnostics Utility on the Tools and Drivers CD/DVD
How to Access and Run Pc-Check From the Tools and Drivers CD/DVD
How to Access and Run Pc-Check From a USB Device
How to Set Up the Tools and Drivers CD/DVD Image on the PXE Server
How to Access the Tools and Drivers CD/DVD From the Target Server
Sun Fire X2270 M2 Server Service Manual Organization
Sun Fire X2270 M2 Server Overview
Maintaining the Sun Fire X2270 M2 Server
Sun Fire X2270 M2 Server Service Procedures and Information
Server diagnostics are contained in the disk operating system-based (DOS-based) Pc-Check utility. This utility can be accessed from ILOM if your server contains an SP, or the utility can be accessed and executed from your server Tools and Drivers CD/DVD. Pc-Check tests all motherboard components (CPU, memory, and I/O), ports, and slots. When enabled, this utility runs at host power-on. The Pc-Check utility is disabled by default in ILOM.
Note - When running the Pc-Check utility on servers that do not have an SP, transfer the Pc-Check utility from the Tools and Drives CD/DVD to the server’s universal serial bus (USB) flash drive and run the utility from the flash drive.
If you encounter any hardware-related error message (such as memory errors or hard disk errors) on your server, run one of the following:
Advanced Diagnostics Test—A specific hardware component test
Immediate Burn-in Test—A server diagnostic test script
For additional information about the purpose and use of the Pc-Check diagnostic software, see Pc-Check Diagnostics Utility.
For instructions for accessing the Pc-Check diagnostic software, see Accessing Pc-Check Diagnostics Utility.
|