About This Documentation (PDF and HTML)
Download Server System Tools and Drivers
Hardware Installation and Product Notes
Sun Fire X2270 M2 Server Installation Guide
Installation Overview and Preparation
Installing the Server Into a Rack With Optional Slide Rails
Communicating With the ILOM and the System Console
Configuring the Factory--Installed Oracle Solaris 10 Operating System
Powering On and Powering Off the Server
Sun Fire X2270 M2 Server Product Notes
Oracle Solaris Operating System
Planning the Oracle Solaris Operating System Installation
Installing Oracle Solaris 10 OS
Introduction to Linux Installation
Preliminary Tasks Before Installing an OS
Installing Oracle Enterprise Linux
Installing SUSE Linux Enterprise Server
Installing Red Hat Enterprise Linux
Booting From OS Distribution Media
Configuring a Linux Server to Support PXE Installation
Identifying Logical and Physical Network Interface Names for Linux OS Configuration
Planning the Operating System Installation
Installing Windows Server 2008 Operating System
Incorporating Sun Fire Drivers Into a WIM Image
Configuring RAID Controller in the BIOS Setup Utility
Sun Fire X2270 M2 Server Installation Guide for ESX Software
Preparing to Install VMware ESX 4.0 and ESXi 4.0
Administration, Diagnostics, and Service
Overview of the ILOM Supplement
Communicating With the ILOM and the System Console
ILOM Platform Features for the Sun Fire X2270 M2 Server
Using ILOM to Monitor the Host
Introduction to Diagnostic Tools
U-Boot Diagnostic Startup Tests
Accessing the Pc-Check Diagnostics Utility on the Tools and Drivers CD/DVD
Sun Fire X2270 M2 Server Service Manual Organization
Sun Fire X2270 M2 Server Overview
Maintaining the Sun Fire X2270 M2 Server
Sun Fire X2270 M2 Server Service Procedures and Information
Sun Fire X2270 M2 Server Internal Cabling
Basic Server Connection
Selecting a Boot Media and OS Delivery Option
How to Recover the SP and BIOS Firmware Using a CD/DVD Drive
How to View or Edit BIOS Settings for New Installations
How to Clear Server Faults
How to Access Pc-Check Through the ILOM CLI
Connecting to the ILOM
How to Connect to the ILOM Command-Line Interface Through the SER MGT Port
How to Connect to the Command-Line Interface Using SSH
How to Update the ILOM and System BIOS Using the Command-Line Interface
How to Update BIOS and ILOM SP Firmware Using the CLI
Supported ILOM 3.0 Feature Set
Replacing the System Battery (CRU)
How to Clear the CMOS
How to Connect to the SP Using an SSH Client
Locations of Internal Server Components
Components List
Ordering Components
Component Replacement Procedures and Topic
Component Tests
Verifying BIOS Settings for New Installations
Verifying BIOS Settings for New Installations
Configuring RAID Controller in the BIOS Setup Utility
How to Switch Serial Port Output Between the SP and the Host Console Using the Web Interface
How to Configure Sideband Management Using the CLI
How to Configure Sideband Management Using the Web Interface
Configuring a Linux Server to Support PXE Installation
Basic Server Connection
How to Connect to the SP Using a Web-Based Client
Connecting to the ILOM
Connecting to the System Console
Selecting a Console Option
Components List
How to Install the Server Cover
How to Remove the Server Cover
How to Add a New CPU and Heatsink Assembly
How to Install a CPU and Heatsink
Locations of Internal Server Components
How to Remove a CPU and Heatsink
Components List
How to Create a PXE Installation Image for Oracle Enterprise Linux
How to Create a PXE Installation Image for Red Hat Linux
Creating a PXE Image for SUSE Linux
Creating and Managing VM Resources
CRU and FRU List