| Skip Navigation Links | |
| Exit Print View | |
|
Sun Fire X2270 M2 Server Product Documentation |
About This Documentation (PDF and HTML)
Download Server System Tools and Drivers
Hardware Installation and Product Notes
Sun Fire X2270 M2 Server Installation Guide
Installation Overview and Preparation
Installing the Server Into a Rack With Optional Slide Rails
Communicating With the ILOM and the System Console
Configuring the Factory--Installed Oracle Solaris 10 Operating System
Powering On and Powering Off the Server
Sun Fire X2270 M2 Server Product Notes
Oracle Solaris Operating System
Planning the Oracle Solaris Operating System Installation
Installing Oracle Solaris 10 OS
Introduction to Linux Installation
Preliminary Tasks Before Installing an OS
Installing Oracle Enterprise Linux
Installing SUSE Linux Enterprise Server
Installing Red Hat Enterprise Linux
Booting From OS Distribution Media
Configuring a Linux Server to Support PXE Installation
Identifying Logical and Physical Network Interface Names for Linux OS Configuration
Planning the Operating System Installation
Verifying BIOS Settings for New Installations
How to View or Edit BIOS Settings for New Installations
Installing Windows Server 2008 Operating System
Task Map for the Windows Server 2008 Installation
Booting Windows Server 2008 Using Local or Remote Media
How to Install Windows Server 2008 Using Local or Remote Media
How to Install Windows Server 2008 Using PXE Network
Prerequisites for Installing PXE Network
How to Install Windows Server 2008 Using PXE Network
Installing Platform-Specific Device Drivers
How to Install Supplemental Software Using the Tools and Drivers DVD
How to Manually Launch the Tools and Drivers Application Using a DVD
Incorporating Sun Fire Drivers Into a WIM Image
How To Add Drivers to the WIM Image
How to Install the WIM Image on a Client System
Configuring RAID Controller in the BIOS Setup Utility
How to Configure RAID Controller in BIOS
Sun Fire X2270 M2 Server Installation Guide for ESX Software
Preparing to Install VMware ESX 4.0 and ESXi 4.0
Administration, Diagnostics, and Service
Overview of the ILOM Supplement
Communicating With the ILOM and the System Console
ILOM Platform Features for the Sun Fire X2270 M2 Server
Using ILOM to Monitor the Host
Introduction to Diagnostic Tools
U-Boot Diagnostic Startup Tests
Accessing the Pc-Check Diagnostics Utility on the Tools and Drivers CD/DVD
Sun Fire X2270 M2 Server Service Manual Organization
Sun Fire X2270 M2 Server Overview
Maintaining the Sun Fire X2270 M2 Server
Sun Fire X2270 M2 Server Service Procedures and Information
This procedure describes how to use the Sun Fire X2200 M2 Tools and Drivers DVD to install platform-specific device drivers.
The application's main menu screen appears.
Note - The DVD is autorun enabled and should automatically launch the application. If the application does not automatically launch, see How to Manually Launch the Tools and Drivers Application Using a DVD.
The Install Drivers and Supplemental Software screen appears.
The Install Pack screen appears.
The screen default is that both platform-specific drivers and supplemental software are selected for update. Updating both the platform-specific drivers and the supplemental software is highly recommended. If you choose to update both, the platform-specific driver update occurs first.
The Welcome wizard screen appears.
The End User License Agreement screen appears.
A screen appears and displays the platform-specific drivers installation status. A green check mark verifies that each driver was installed successfully.
The System Settings Change screen appears with a Restart dialog popup.
Note - Do not click the option to restart the server until after the next step.
The server restarts with the updated drivers.
|