Configure the Service Processor
- After the service processor boots, access the ILOM command-line interface (CLI) through the serial
management port. See Log Into the Service Processor Using the Serial Management Port.
- Configure the service processor network addresses. See Configure the Service Processor Network Management Port.
Note - The service processor network management port is not operational until you configure network settings
for the service processor (through the service processor serial management port).
- Commit the changes to the service processor network parameters. See Step 3 in Power On the System for the First Time.
- Power on the server from a keyboard using the ILOM software. See Examine the System for Faults.