Sun Blade 6048 InfiniBand QDR Switched Network Express Module User’s Guide
820-6705-10
1. Sun Blade 6048 InfiniBand QDR Switched Network Express Module Introduction
1.2 Sun Blade 6048 Platform Support
1.3 IB-QNEM Indicators, Buttons, and Ports
2. Replacing the Sun Blade 6048 InfiniBand QDR Switched Network Express Module
2.1 Replacing IB-QNEM Hardware
To Remove the IB-QNEM in a Powered-On Chassis
To Install the IB-QNEM in a Powered-On Chassis
To Verify Hardware Installation
To Verify Installation Using the ILOM Web Interface
To Verify Installation Using the ILOM CLI
To Verify Component Status Using the LEDs
To Manage IB-QNEM Using the ILOM CLI
3. Updating the Sun Blade 6048 InfiniBand QDR Switched Network Express Module Firmware
3.1 Downloading the IB-QNEM Firmware
3.2 Updating IB-QNEM Firmware Using Linux Host
To Update the IB-QNEM Integrated Switch Firmware
To Verify the IB-QNEM Switch Firmware
B. InfiniBand Command Examples
B.1 Configuration Scenario Used for Command Examples
To Display the Local Host’s IB Device Status
To Check the Presence of an IB-QNEM
To List All IB Hosts in the IB Network
To Display the Network Topology for the Shelf
To Query the Local Host’s IB Firmware
To Check the Status of the Subnet Manager
Copyright © 2009, Sun Microsystems, Inc. All rights reserved.