Configure the IGMP Query Maximum Response Time

1. Enter Interface Configuration mode for VLAN 2.

   SEFOS# configure terminal
   SEFOS(config)# interface vlan 2

2. Set the maximum response time to 200 seconds.

   SEFOS(config-if)# ip igmp query-max-response-time 200
   SEFOS(config-if)# end

3. Review the configuration information.

   SEFOS# show ip igmp interface
    
    vlan2, line protocol is up
    Internet Address is 12.0.0.1/8
    IGMP is enabled on interface
    Current IGMP router version is 2
    IGMP query interval is 125 seconds
    Last member query response interval is 10 seconds
    IGMP max query response time is 200 seconds
    Robustness value is 3
    IGMP querying router is 12.0.0.1 (this system)
    Fast leave is disabled on this interface
    No multicast groups joined