Configure the IGMP Version on an Upstream Interface

Document Information

Using This Documentation

Product Notes

Related Documentation

Acronyms and Abbreviations

CLI Command Modes

Feedback

Support and Accessibility

Configuration Guidelines

Default Settings

Enable IGMP Globally

Enable IGMP on an Individual Interface

Enable Fast Leave

Configure the IGMP Version

Configure the IGMP Query Interval

Configure the IGMP Query Maximum Response Time

Configure the IGMP Robustness Value

Configure the IGMP Last Member Query Interval

Configure a Static-Multicast Group Membership

Enable the IGMP Proxy Service

Configure an Interface as an Upstream Interface

Configure the Purge Interval for an Upstream Interface

Configure the IGMP Version on an Upstream Interface

Configure the IGMP Proxy

Enter Interface Configuration mode for VLAN 2.

SEFOS# configure terminal
SEFOS(config)# interface vlan 2

Set the IGMP version to 2.

SEFOS(config-if)# ip igmp-proxy mrouter-version 2
SEFOS(config-if)# end

Review the configuration information.

SEFOS# show ip igmp-proxy mrouter
 
IfName/IfId OperVersion  CfgVersion UpTime/VersionExpiryTime  PurgeIntvl
-------------------------------------------------------------------------
vlan2 /40    IGMPv2       IGMPv2         [0d 00:00:59.96]/0         100

Skip Navigation Links
Exit Print View
	Sun Ethernet Fabric Operating System IGMP Administration Guide

IGMP Administration Guide

Configure the IGMP Version on an Upstream Interface