| Sun Blade 6000 Modular System Installation Guide |     |
Sun Blade 6000 Modular System Installation Guide
Installation Guide
820-0050-11
|
Contents |
1. Sun Blade 6000 Modular System Installation Overview
About the System Shipped to You
Contents of the Chassis Ship Kit
Overview of Installation Tasks
2. Mounting the Sun Blade 6000 Chassis in a Rack
Preparing to Mount the Chassis in a Rack
Avoiding Electrostatic Discharge
How to Remove the Power Supply Modules
How to Remove the System Fan Modules
Mounting the Chassis in a Rack
Installing Modules and Options
How to Install Server and Storage Modules
How to Install Power Supply Modules
How to Install Rear Fan Modules
3. Attaching Cables and Devices to Modules and Powering On the System Chassis
Cabling Network Express Modules (NEMs)
How to Cable Network Express Modules
Cabling PCIe ExpressModules (PCIe EMs)
Cabling the Chassis Monitoring Module (CMM)
Cabling the AC Power Interface
How to Connect the Power Cables to the AC Power Interface
Powering On the System Chassis for the First Time
How to Ensure That the System Chassis Is Powered Up
4. Configuring the Sun Blade 6000 Modular System Management Network
About The Oracle Integrated Lights-Out Manager
Preconfigured CMM ILOM Administrator Account
Establishing an Initial Connection to the CMM ILOM
Assigning an IP Address to the CMM
How to Use DHCP to Assign All IP Addresses
How to Assign a Static IP Address to the CMM
Communicating With CMM ILOM Using the Management Network IP Addresses.
How to Log Into the CMM Through the SER MGT Port
How to Log Into the CMM Through the NET MGT Port
How to Change Network Settings
How to Test the IPv4 or IPv6 Network Configuration
Changing the CMM ILOM Root Account Password with CLI
| Sun Blade 6000 Modular System Installation Guide | 820-0050-11 | |
Copyright © 2010, Oracle and/or its affiliates. All rights reserved.