This chapter describes the physical, electrical, and environmental specifications of the disk tower 1000 system.
See Table A-1 and Table A-2 for disk tower 1000 system physical specifications.
Table A-1 Physical Specifications
----------------------------------------------------------------------------------------
US Metric Comments ----------------------------------------------------------------------------------------
Height 8.27 in 21 cm Width 19.46 in 49.43 cm Depth 21.06 in 53.49 cm Weight 70 lb approximate 31.75 kg Actual weight depends on the installed options Power cord 6 ft 1.83 m ----------------------------------------------------------------------------------------
.
Table A-2 Clearance and Service Access
--------------------------------------------------------------------
US Metric Comments --------------------------------------------------------------------
Front 12 in 30.48 cm Access to power supply Rear 16 in 40.64 cm Access to disk board, fan tray, and cables Left 6 in 15.24 cm To maintain airflow Right 6 in 15.24 cm To maintain airflow --------------------------------------------------------------------
Table A-3 lists the specifications for the power supply.
Table A-3 Power Supply Characteristics
---------------------------------------------------------------------------------------
Parameter Value ---------------------------------------------------------------------------------------
Input Voltage range 100-240 VAC Current, maximum 9.5A Current frequency range 47-63 Hz Output +5 VDC, maximum 5 to 100A +1.2 VDC, maximum 0 to 40A +12 VDC, maximum 0 to 2.5A - 12 VDC, maximum 0 to 0.6 +12 VDC, maximum 1.5 to 8A for fans Power rating Maximum power not to exceed 650W Volt-Ampere rating 9.5A RMS at 100 VAC input at 650W load ---------------------------------------------------------------------------------------
The acceptable environmental ranges for the disk tower 1000 system are: