The following table lists the plan settings that you need to provide for each host during installation and configuration of the Open Telecommunications Platform on a clustered OTP system. Plan setting names used in the graphical user interface installation are listed in bold text.
Print a copy of the following table for each host and then fill out the required information to use when installing and configuring the Open Telecommunications Platform on a clustered OTP system.
Setting Name |
Example |
Setting Value |
---|---|---|
Media Directory (GUI) mediaDirectory (CLI) |
/cdrom/otp_11_dvd/otp1.1 /net/external OTP installation server/otp1.1 |
____________________________________ |
Cluster Name (GUI) clusterName (CLI) |
otp-cluster-name |
____________________________________ |
Secondary Interface for failover (GUI) secondaryInterface (CLI) |
cd1, bge1, hme1, eri1 |
____________________________________ |
Secondary IP (GUI) secondaryIP (CLI) |
____________________________________ |
|
Test Address for IPMP (GUI) testIPAddress (CLI) |
____________________________________ |
|
Install All Patches (GUI) allPatches (CLI) |
|
|
Enable Auto Configuration of IPMP (GUI) hn_autoConfigureIPMP (CLI) |
|
|
Sponsoring Node (GUI) hn_sponsorNode (CLI) This is the name that is to be assigned to the first OTP host for additional OTP host n. |
OTPfirsthost h1_sponsorNode=OTPfirsthost … hn_sponsorNode=OTPfirsthost |
____________________________________ |
Host Name (GUI) hn_hostName (CLI) This is the name that is to be assigned to additional OTP host n. |
OTPhost1 h1_hostName=OTPhost1 … hn_hostName=OTPhostn |
____________________________________ |
Physical IP Address (GUI) hn_physicalIPAddress (CLI) |
10.20.30.10 h1_physicalIPAddress=10.20.30.10 … hn_physicalIPAddress=10.20.30.11 |
____________________________________ |
Private Interface 1 hn_privateInterface1 (CLI) |
bge0, ce0, cd0, hme0, eri0 h1_privateInterface1=bge0 … hn_privateInterface1=bge0 |
____________________________________ |
Private Interface 2 hn_privateInterface2 (CLI) |
bge1, ce1, cd1, hme1, eri10 h1_privateInterface2=bge0 … hn_privateInterface2=bge0 |
____________________________________ |
Transport Type Interface 1 (GUI) hn_transportTypeInterface1 (CLI) |
dlpi |
dlpi |
Transport Type Interface 2 (GUI) hn_transportTypeInterface2 (CLI) |
dlpi |
dlpi |
Quorum Auto Configuration (GUI) hn_quorumAutoConfiguration (CLI) |
|
|
Logical Host (GUI) logicalHost (CLI) |
host–01–logical |
____________________________________ |
Logical IP Address (GUI) logicalIPAddress (CLI) |
____________________________________ |
|
Manager Host Name (GUI) managerHostName (CLI) |
cluster01manager |
____________________________________ |
Manager Physical IP Address (GUI) managerPhysicalIPAddress (CLI) |
____________________________________ |
|
Manager Node Authentication (GUI) managerNodeAuthentication (CLI) |
sys |
sys |
Manager Private Interface 1 (GUI) managerPrivateInterface1 (CLI) |
bge0, ce0, cd0, hme0, eri0 |
____________________________________ |
Manager Private Interface 2 (GUI) managerPrivateInterface2 (CLI) |
bge1, ce1, cd1, hme1, eri1 |
____________________________________ |
Manager Transport Type Interface 1 (GUI) managerTransportTypeInterface1 (CLI) |
dlpi |
dlpi |
Manager Transport Type Interface 2 (GUI) managerTransportTypeInterface2 (CLI) |
dlpi |
dlpi |
Manager Management Interface (GUI) managerManagementInterface (CLI) |
bge0, ce0, cd0, hme0, eri0 |
____________________________________ |
Manager Provisioning Interface (GUI) managerProvisioningInterface (CLI) |
bge0, ce0, cd0, hme0, eri0 |
____________________________________ |
Number of Nodes (GUI) noOfNodes (CLI) |
____________________________________ |