|Skip Navigation Links|
|Exit Print View|
|System Administration Guide: Security Services Oracle Solaris 11 Express 11/10|
All hosts that participate in the Kerberos authentication system must have their internal clocks synchronized within a specified maximum amount of time (known as clock skew). This requirement provides another Kerberos security check. If the clock skew is exceeded between any of the participating hosts, client requests are rejected.
The clock skew also determines how long application servers must keep track of all Kerberos protocol messages, in order to recognize and reject replayed requests. So, the longer the clock skew value, the more information that application servers have to collect.
The default value for the maximum clock skew is 300 seconds (five minutes). You can change this default in the libdefaults section of the krb5.conf file.
Note - For security reasons, do not increase the clock skew beyond 300 seconds.
Because maintaining synchronized clocks between the KDCs and Kerberos clients is important, you should use the Network Time Protocol (NTP) software to synchronize them. NTP public domain software from the University of Delaware is included in the Oracle Solaris software.
Note - Another way to synchronize clocks is to use the rdate command and cron jobs, a process that can be less involved than using NTP. However, this section focuses on using NTP. And, if you use the network to synchronize the clocks, the clock synchronization protocol must itself be secure.
NTP enables you to manage precise time or network clock synchronization, or both, in a network environment. NTP is basically a server-client implementation. You pick one system to be the master clock (the NTP server). Then, you set up all your other systems (the NTP clients) to synchronize their clocks with the master clock.
To synchronize the clocks, NTP uses the xntpd daemon, which sets and maintains a UNIX system time-of-day in agreement with Internet standard time servers. The following shows an example of this server-client NTP implementation.
Figure 23-1 Synchronizing Clocks by Using NTP
Ensuring that the KDCs and Kerberos clients maintain synchronized clocks involves implementing the following steps:
Setting up an NTP server on your network. This server can be any system, except the master KDC. See Managing Network Time Protocol (Tasks) in System Administration Guide: Network Services to find the NTP server task.
As you configure the KDCs and Kerberos clients on the network, setting them up to be NTP clients of the NTP server. See Managing Network Time Protocol (Tasks) in System Administration Guide: Network Services to find the NTP client task.