Skip Navigation Links | |
Exit Print View | |
Oracle Hardware Management Pack 2.2.x HTML Documentation Collection |
Management Agents User's Guide
Oracle Server CLI Tools Overview
CLI Tools Command Syntax and Conventions
CLI Tools Device-Naming Convention
Device Terminology Used by biosconfig
biosconfig for Oracle Solaris OS
Viewing biosconfig Command Options and Version Information
How to View biosconfig Command Options
How to View biosconfig Version Information
Configuring the Device Boot Order
Methods for Changing the Boot List
How to Set the First Boot Device for the Next Boot
How to Make a Persistent Change to Boot Order
How to Change Boot Order Based on the PCI Bus, Device, or Function
How to Capture the BIOS CMOS Golden Image
How to Apply the BIOS CMOS Golden Image
Configuring Individual CMOS Settings
Static and Dynamic CMOS Settings
How to Configure a Static CMOS Setting
How to Configure a Dynamic Setting
Commands That Produce Unrelated, Innocuous, Extra Output
Automatic and Manual Update Modes
fwupdate Command-Line Interface
Automatic Mode fwupdate Command-Line Interface
Manual Mode fwupdate Command-Line Interface
Automatic Mode update Subcommand
fwupdate Network Based Service Processor Options
How to Use fwupdate to Update an Oracle ILOM Service Processor
Brief Listing of a Disk Example
How to Remove a Disk from a RAID Volume
How to Remove a Spare Disk or a RAID Volume
How to Modify the BIOS Boot Target
How to Modify a RAID Volume Name
start task and stop task Subcommands
restore config and clear config Subcommands
How to Check a Controller Configuration Exists
How to Restore a RAID Controller Configuration
How to Clear a RAID Controller Configuration
How to Export Inventory Data to a File
How to Configure RAID Volumes from a File
Creating RAID Volumes With Partial Disks
Guidelines for Using the RAID Volume Size Option
Deletion of RAID Volumes With Partial Disks
Exporting a RAID Configuration Including a RAID Volume With Partial Disks
Adding or Removing a Partial Disk
Restoring and Modifying Oracle ILOM XML Configuration Files
XML File Configuration Commands
How to Export an XML Configuration
How to Import an XML Configuration
How to Restore Oracle ILOM to Defaults
How to List System Summary Information
How to Modify a User Password or Role
How to Create an SNMP Community
How to List IPv4 Network Settings
How to Modify IPv4 Network Settings
How to List IPv6 Network Settings
How to Modify IPv6 Network Settings
How to List Service Processor Identification Information
How to Modify Identification Information
How to Modify Clock Information
Host-to-ILOM Interconnect Configuration Commands
How to Enable the Host-to-ILOM Interconnect
How to Disable the Host-to-ILOM Interconnect
How to Modify the Host-to-ILOM Interconnect
How to List the Host-to-ILOM Interconnect Settings
How to Set Up a Credential Cache on the Host
How to Delete a Credential Cache on the Host
How to List Subsystem Information
How to Export Subsystem Information
How to List Zoning Information
enable zoning and disable zoning Subcommands
How to Enable and Disable Zoning
Sun IPMI System Management Driver 2.1
After the fwupdate tool is used to upgrade firmware, an execution summary provides information on whether or not the upgrade was successful. This information is also written to the log file.
The following examples show the possible execution summary messages:
Message printed after a successful dry-run/check function:
Check firmware successful for device: device_name
The upgrade was successful, but no firmware version information is available for this component:
Upgrade of firmware for device_name succeeded. Version information was not available.
Consult your product release notes for information on how to verify the upgrade.
Upgrade was successful:
Upgrade of device_name from old_fw to new_fw succeeded.
The version number of the software did not change after a successful upgrade:
Upgrade of device_name from old_fw succeeded, but is not yet active.
This might mean that the server needs to be reset, or that other instructions need to be followed. Consult your product release notes for instructions on how to update the version number.
Upgrade failed:
Upgrade of device_name failed: error_message
The variables in the previous output represent the following:
device_name is the logical name of the device that is being upgraded.
old_fw is the old firmware version.
new_fw is the new firmware version.
error_message is the error message that explains why the firmware update did not succeed.
See also: