Using the itpconfig Tool

The itpconfig tool enables you to configure a trap proxy to send traps from Oracle Integrated Lights Out Manager (ILOM) over the Host-to-ILOM Interconnect and forward the traps from the host server to a configurable destination. itpconfig can also enable or disable the Host-to-ILOM Interconnect, which is available on the latest Oracle servers. The Host-to-ILOM Interconnect provides a high speed internal interconnection between your server's Oracle ILOM service processors and the host, and must be enabled for the trap forwarding to function.

Using itpconfig is similar in usage to the Oracle Server CLI Tools. See Oracle Server CLI Tools User’s Guide for more information.

From Hardware Management Pack 2.2.6 onwards itpconfig is supported on Microsoft Windows Server based operating systems. See Configuring Trap Forwarding on Windows Servers for additional configuration information.

This section includes the following topics:

• itpconfig Command Usage

• itpconfig Usage Scenario

• Host-to-ILOM Interconnect Configuration Commands

• itpconfig Trap Forwarding Commands

• Configuring Trap Forwarding on Windows Servers