Skip Navigation Links | |
Exit Print View | |
Sun Storage 2500-M2 Arrays Hardware Release Notes, Release 6.10 |
1. Sun Storage 2500-M2 Arrays Hardware Release Notes
Supported Disk Drives and Tray Capacity
Array Expansion Module Support
Supported Host Bus Adaptors (HBAs)
Supported FC and Multilayer Switches
ALUA/TPGS Multipathing with VMware
Procedure for ESX4.1U2 and ESXi5.0
Procedure for ESX4.1U3 and ESXi5.0U1
SAS Host Ports on the Sun Storage 2540-M2
Log Events With smartd Monitoring Enabled
Kernel Panics During Controller Firmware (CFW) Download
Kernel Panics During Controller Firmware Download
Network Interface on Device eth0 Fails to Come Online When Booting a Host
Tasks Aborts Are Logged During a Controller Firmware Upgrade
Unable to Add More Than 117 Volumes to the Oracle Virtual Machine (OVM) Manager Database
After an NVSRAM Download, a Controller Reboots a Second Time when the NVSRAM is Activated
Input/Output (I/O) Errors Occur when Disconnection of Devices from a SAS Switch Is Not Detected
Host Operating System Logs "Hung Task" During a Path Failure
Data is Misread when a Physical Drive Has an Unreadable Sector
Oracle's Sun Storage Common Array Manager (CAM) software is a key component for the initial configuration, operation, and monitoring of Sun Storage 2500-M2 arrays hardware. It is installed on a management host cabled to the array via out-of-band Ethernet. Note: In-band management is also supported.
After downloading CAM, review the latest Sun Storage Common Array Manager Quick Start Guide and Sun Storage Common Array Manager Installation and Setup Guide to begin installation for Solaris OS hosts. For Linux and Windows host installation, refer to the Sun Storage Common Array Manager Release Notes, Version 6.10. CAM documentation can be found here:
http://www.oracle.com/technetwork/documentation/disk-device-194280.html