Skip Navigation Links | |
Exit Print View | |
![]() |
Sun Blade X3-2B (formerly Sun Blade X6270 M3) Installation Guide |
Sun Blade X3-2B Model Name Change
Getting the Latest Firmware and Software
About the Installation Procedure
About Server Features and Components
Server Module Front Panel and Indicators
Preparing to Install the Server Module
Attach the 3-Cable Dongle to the Server Module
Attach a VGA Monitor to the Dongle Video Connector
Attach a Keyboard and Mouse to the Dongle or Server Module
Attach a Serial Device to the Dongle
Determining the Oracle ILOM SP IP Address
Logging In to Server Module SP Oracle ILOM
Accessing the Server Module Console Through Oracle ILOM
Setting Up Software and Firmware
Accessing Oracle System Assistant
Set Up Software and Firmware (Oracle System Assistant)
Setting Up an Operating System and Drivers
Preparing the Storage Drives to Install an Operating System
Prepare the Storage Drives (Oracle System Assistant)
Make a Virtual Drive Bootable (LSI WebBIOS Utility)
Configuring the Preinstalled Oracle Solaris OS
Oracle Solaris OS Documentation
Configure Preinstalled Oracle Solaris 11
Configuring Preinstalled Oracle VM Software
Oracle VM Server Configuration Worksheet
Configure the Preinstalled Oracle VM Server
Getting Started With Oracle VM
Configuring the Preinstalled Oracle Linux OS
Oracle Linux Configuration Worksheet
Configure the Preinstalled Oracle Linux OS
Register and Update Your Oracle Linux OS
Troubleshoot Installation Issues
Powering Off the Server for Graceful Shutdown
Powering Off the Server for Immediate Shutdown
Use the Oracle ILOM CLI to Reset the Server
Use the Oracle ILOM Web Interface to Reset the Server
Technical Support Information Worksheet
Locating the System Serial Number
Getting Server Firmware and Software
Firmware and Software Access Options
Available Software Release Packages
Each time a server module powers on in a Sun Blade 6000 modular system, it queries the CMM to ensure that sufficient power is available from the power supply units (PSUs) to power on the server module.
If the power is insufficient, the CMM prevents the server module from receiving full power. In this situation, the OK/Power LED on the front panel of the server module remains at standby blink.
To troubleshoot this power issue, follow these guidelines:
Review the Oracle ILOM event log messages to determine whether the server module has permission to power on. An event message is recorded in the log any time there is inadequate amount of power available from the chassis PSUs to power on a server module.
For more information about the Oracle ILOM event log or monitoring power consumption, refer to the http://www.oracle.com/pls/topic/lookup?ctx=ilom31.
Ensure that the system chassis has the proper number of power supplies installed to support powering on all the chassis components that are currently installed.
Refer to the system chassis documentation for information about the number of power supplies required to power on chassis components.
To avoid power loss, use the default CMM power management settings in Oracle ILOM for power supplies.
For more information about power management, refer to the http://www.oracle.com/pls/topic/lookup?ctx=ilom31.
Note - When power-on permissions become available, the OK/Power LED on the front panel of the server module illuminates a standby blink.
As needed, refer to theOracle x86 Server Diagnostics, Applications, and Utilities Guide for instructions on how to run the start up diagnostic tools provided with the server module.