S

safety information and symbols, Safety Information

SCSI controller alias, Prepare to Use the FCode Utility

select command, Prepare to Use the FCode Utility

SER MGT port, Access the SP (Oracle ILOM)

serial management port, see SER MGT port, Access the SP (Oracle ILOM)

serial terminal, settings, Connect a Terminal or Emulator to the SER MGT Port

server

connecting power cords, Connect Power Cords

controlling, Controlling the Server

locating, Locate the Server

powering off

emergency shutdown, Power Off the Server (Emergency Shutdown)

gracefully with power button, Power Off the Server (Power Button - Graceful)

using service processor command, Power Off the Server (SP Command)

powering on

using power button, Power On the Server (Power Button)

usingstart /SYS command, Power On the Server (start /SYS Command)

resetting from ILOM, Reset the Server (Oracle ILOM)

resetting from the OS, Reset the Server (Oracle Solaris OS)

service processor

accessing, Access the SP (Oracle ILOM)

accessing with serial management port, Log In to the SP (SER MGT Port)

FRU name, FRU Reference

installing, Install the Service Processor Card

locating faulty, Locate a Faulty Service Processor Card

powering on for the first time, Power On the System for the First Time

removing, Remove the Service Processor Card

set command, Assign a Static IP Address to the NET MGT Port

verifying functionality, Verify Service Processor Card Functionality

Service Processor LED, Interpreting Diagnostic LEDs

service processor prompt, Power Off the Server (SP Command)

set command, Assign a Static IP Address to the NET MGT Port

shipping bracket fasteners, Determine Correct Shipping Bracket Fasteners

show /SP/network command, Assign a Static IP Address to the NET MGT Port

show-children command, Prepare to Use the FCode Utility

show command, Display FRU Information (show Command)

show-disks command, Boot the Oracle Solaris Operating System

show faulty command

Check for Faults (show faulty Command)

Fault Management Command Examples

Clear POST-Detected Faults

Clear PSH-Detected Faults

and DIMM configuration errors, DIMM Configuration Errors (show faulty Command Output)

using to check for faults, Diagnostics Process

showcomponent command, Display System Components

slots, ports, and LEDs illustrated, Rear Panel Components

SP, resetting, Reset the SP to Default Values

Standby mode, Prepare Power Cords

standby mode, when AC connected, Cabling Requirements

standby voltage, 3.3v, Power On the System for the First Time

stop /SYS (ILOM command), Power Off the Server (SP Command)

stop bit, Connect a Terminal or Emulator to the SER MGT Port

storage backplanes

FRU name, FRU Reference

installing, Install a Storage Backplane

removing, Remove a Storage Backplane

SunVTS, Diagnostics Overview

system administration overview, Understanding System Administration Resources

system battery

FRU name, FRU Reference

installing, Install the System Battery

removing, Remove the System Battery

system communication, Accessing the Server

system components, see components, Display System Components

system configuration PROM

FRU name, FRU Reference

installing, Install the System Configuration PROM

locating, Main Module Components

removing, Remove the System Configuration PROM

system console, logging in, Log In to the System Console

system console escape sequence#., Power Cycle the Server

system controls, front panel, Interpreting Diagnostic LEDs

system identification, changing, Change System Identifier Information

System Locator LED

Interpreting Diagnostic LEDs

Interpreting Diagnostic LEDs

system message log files, viewing, View System Message Log Files

System Overtemp LED

Interpreting Diagnostic LEDs

Interpreting Diagnostic LEDs

System Power button, Interpreting Diagnostic LEDs

System Power OK LED

Interpreting Diagnostic LEDs

Interpreting Diagnostic LEDs

System Service Required LED

Interpreting Diagnostic LEDs

Interpreting Diagnostic LEDs